Reply to thread

Message: <blockquote data-quote="lateralis" data-source="post: 1474112" data-attributes="member: 35325">My oil and rear diff cover finally came in late yesterday so I was finally able to get under the truck today. After about a week-ish of driving with the messed up seal it was kind of a mess under there. When I got the seal off it actually didn't look as bad as I initially thought, but it was still ruined along with the deflector. I've included some pics of the cradle to diff housing. There should be no gap like in the pictures when you install this thing. For some reason mine sits farther back or maybe the diff housing is a little bit longer. It might be a '19 or '20 thing I'm not sure, but it is a 100% fact that on mine the U bracket would sit at the edge of the diff pushing the front of the cradle up. If any of you have this torque arm with the skid plate option and have any doubt in your mind if its going to grenade your rear pinion seal, do yourself a favor and just cut that bracket. It's easy to do, wont affect anything and will give you a piece of mind. If not... well you might end up like me.[ATTACH=full]142525[/ATTACH][ATTACH=full]142526[/ATTACH][ATTACH=full]142527[/ATTACH][ATTACH=full]142528[/ATTACH][ATTACH=full]142529[/ATTACH]</blockquote>