dudmleh522
Full Access Member
I lost my 2nd key fob so ordered a replacement one. Anybody know how to program the keyfob on 2018 screw?
key fob programming
- Thread starter dudmleh522
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
JorgesRaptor
Full Access Member
Without two keys already I believe you need a locksmith or dealer to program it
Correct. I believe ForScan can program keys if you buy the license.
Jughead
Active Member
So if you have 2 you can program a 3rd FOB?
Noplacelikeloam
Full Access Member
Correct, all F150s with push button start can do this.
JorgesRaptor
Full Access Member
Correct. I ran into this same issue, so now I keep a 3rd key programmed as well just in case. Found them on Amazon;
OEM 5-Button Smart Key Fob Remote Compatible With 2017-2020 Ford Raptor (FCC ID: M3N-A2C13601900, P/N: 164-R8185, JL3V-15K601-AA) https://www.amazon.com/dp/B086DYC7GC/?tag=fordraptorforum-20
Then programming process is here;
Programming a third key
So, I lost a key on my Gen1 and found out it's a LOT more expensive to replace a key if you have ONE working key instead of two. With the Gen2, I figured I would get a third spare so if I lost one, I wouldn't be stuck paying big money for a second. Bought one on Ebay for $80. Brand new...
www.fordraptorforum.com
Jughead
Active Member
Correct. I ran into this same issue, so now I keep a 3rd key programmed as well just in case. Found them on Amazon;
OEM 5-Button Smart Key Fob Remote Compatible With 2017-2020 Ford Raptor (FCC ID: M3N-A2C13601900, P/N: 164-R8185, JL3V-15K601-AA) https://www.amazon.com/dp/B086DYC7GC/?tag=fordraptorforum-20
Then programming process is here;
Programming a third key
So, I lost a key on my Gen1 and found out it's a LOT more expensive to replace a key if you have ONE working key instead of two. With the Gen2, I figured I would get a third spare so if I lost one, I wouldn't be stuck paying big money for a second. Bought one on Ebay for $80. Brand new...
Spectragod
Full Access Member
It has to be enabled that you can program additional keys, and..... Ford has put a caveat into their software, you have to be a licensed locksmith who’s pays $600 a year to a 1 man operation that authorizes you to program keys, or be the dealer.
I have IDS, I could ot enable it in my cluster to program extra keys, I went to the dealer, I did however give the tech the $50 bill he dropped while programming my additional 2 keys.
I have IDS, I could ot enable it in my cluster to program extra keys, I went to the dealer, I did however give the tech the $50 bill he dropped while programming my additional 2 keys.
Similar threads
