Reply to thread

Message: <blockquote data-quote="taquitos" data-source="post: 2046652" data-attributes="member: 65456">Tbd on best way to go about calibration. With a 1” lift then it would be at oe position. Without a 1” lift I’m thinking just jack the rear up an inch at the trailer hitch to run calibration and call it a day. Honestly I’d probably not recalibrate it at all first and see how that goes. These didn’t really cost me anything to make. I machined them out of scrap material from something else. If I had to put a number on what it cost if machine time and materials weren’t just there, I’d say about $200.</blockquote>

Total: 1,531 (members: 19, guests: 1,512)