ICON/PSS reservoir

[ray101381]

Got this installed today, very easy install.
-use some old rags and cover area below reservoir and hoses
-remove maf sensor harness
-Open reservoir
-use channel lock pliers to slide clamp back on smaller diameter hose and remove hose
-drain PS fluid into cup or some sort of pan
-squeeze clamp on bigger hose and slide off hose
-there's a clip holding a wire harness to the top of the bolt holding the reservoir on, use flat head while pulling up on wire harness and remove
-11mm deep socket remove bolt
-remove stock reservoir
-install is the reverse
-fill reservoir to line, start car, move steering wheel back and forth and check fluid.

fit and finish is top notch, very happy.

 

[Java]

I put one in too. Are you going to add the cooler?

 

[ray101381]

no, i spoke with icon as well as RPG and they don't seem to think that a cooler is warranted, if you're in the desert say in baja or texas doing some really harsh long runs maybe a cooler is needed.

 

[Captain Awesome]

let us know what you think after a bit i got one on my mod list and wouldn't mind hearing some real world feed back.

 

[onesickpuppy]

Nice!!!

 

[NickPic83]

real nice. what does this offer that the RPG doesnt? just curious what makes this more expensive...

 

[ray101381]

real nice. what does this offer that the RPG doesnt? just curious what makes this more expensive...

honestly they do the same thing, the only reason i got this one was the lead time on the RPG was kinda long, also i've seen some inconsistencies with the weld quality and powder coating on the RPG ones. not normal for RPG

 

[NickPic83]

o ok makes sense. thanks for the quick honest answer!

 

[TEXAS MOTORWORX]

Glad you got it installed Ray...looks good.