Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
That I did not do. I cycled it through 4L and 4H then back down to 4L and drove it around the block then I put it back to 2. I can put it on 4H and drive it around the block a few times.
yes. do that and see if the noise goes away
Ok, just got back, I made a few laps. The sound came back like it was before I cycled the 4x4.
ok, so in 4wd driving around the sound is still there? or only comes back in 2wd?
Correct, it is still there.
ok, that rules out a vacuum leak.
i would pull it and make sure the caliper itself isnt frozen. even if the guide rods are greased, the calipers can still be frozen
ok will do!
