how to hard wire dash cam

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

txgunsntrucks

Full Access Member
Joined
Jan 18, 2020
Posts
507
Reaction score
292
Location
texas
the wires ran down to the center console aren't bad.

But has anyone hard wired a dash cam? if so how would be much appreciated.
 

BroncoAZ

Full Access Member
Joined
Sep 27, 2019
Posts
964
Reaction score
734
Location
Cape Cod, MA
I’ll be adding a dual dash camera system to mine shortly. It uses a micro USB cable between the main (front) and secondary (rear) cameras.
 

Winchester30

FRF Addict
Joined
Oct 4, 2018
Posts
1,555
Reaction score
5,321
Location
WI
There’s some F150 YouTube videos that show you how to lower the headliner, remove the passenger pillar, etc.
 
OP
OP
txgunsntrucks

txgunsntrucks

Full Access Member
Joined
Jan 18, 2020
Posts
507
Reaction score
292
Location
texas
I tucked the wire into the headliner and ran it down the passenger pillar.

then under the floor mat to the center console.


I'll check out videos on where exactly to wire it into on by the fuse box
 

nikhsub1

FRF Addict
Joined
Mar 5, 2017
Posts
4,316
Reaction score
5,021
Location
Los Angeles
It's really easy - as others have said, and the video shows, the front cam runs headliner to a pillar to passenger kick panel. Rear camera runs headliner all the way around to the front camera. The hardest part is figuring where to tap into in the fuse panel.
 
Top