Normal
He is actually dead on. The filter will hold up to about a half a quart of oil. But it will look as if it is filling qiucker without the swirling it a bit to allow the oil to soak into the filter. I would get the filter out and put fresh oil in it first and allow it to soak as you drain the pan and remove the old filter. Doing so allows time for the filter to get good and saturated.Slowly fill the filter to about 1/2-3/4 full and let stand (supported), once saturated it shouldn't spill too much during installation. Make sure to apply a little oil to the black gasket part of the "o-ring" of the filter.
He is actually dead on. The filter will hold up to about a half a quart of oil. But it will look as if it is filling qiucker without the swirling it a bit to allow the oil to soak into the filter. I would get the filter out and put fresh oil in it first and allow it to soak as you drain the pan and remove the old filter. Doing so allows time for the filter to get good and saturated.
Slowly fill the filter to about 1/2-3/4 full and let stand (supported), once saturated it shouldn't spill too much during installation. Make sure to apply a little oil to the black gasket part of the "o-ring" of the filter.
