GooseTuned Gen 3 - Baseline Dyno Runs vs Gen 2 Baseline!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
GooseTuned

GooseTuned

Supporting Vendor
Supporting Vendor
Joined
Aug 24, 2018
Posts
1,610
Reaction score
1,906
Location
New Mexico
So since we are sending the ECU in to COBB for unlock, do we know how this affects the ability for the dealer to reflash if needed? Is this going to need to go to COBB again if the dealer flashes the ECU?
The dealer can still reflash. I was told that the unlock sits in a place where it shouldn't be touched by the dealer. COBB may be able to go further into those details if needed
 

tabvette

FRF Addict
Joined
Jun 16, 2021
Posts
2,122
Reaction score
3,444
Location
Canandaigua, New York
The dealer can still reflash. I was told that the unlock sits in a place where it shouldn't be touched by the dealer. COBB may be able to go further into those details if needed
Biggest question, and it may have been answered already in the prior 37 pages I did not bother to read.... Will this void my warranty? Sorry if it has already been answered.
 
OP
OP
GooseTuned

GooseTuned

Supporting Vendor
Supporting Vendor
Joined
Aug 24, 2018
Posts
1,610
Reaction score
1,906
Location
New Mexico
Biggest question, and it may have been answered already in the prior 37 pages I did not bother to read.... Will this void my warranty? Sorry if it has already been answered.
I personally haven't had any issues with warranty, and TONS of customers have been ok. Just uninstall before and dealer work.
 

Raptor R

Full Access Member
Joined
Feb 2, 2020
Posts
606
Reaction score
467
Location
North
Still no tuning options for the Gen 3?

edit, was just reading this thread… there is an option now?
 

Nex

RIP CoronaRaptor
Joined
Sep 2, 2021
Posts
8,363
Reaction score
23,970
Location
Washington State
Still no tuning options for the Gen 3?

edit, was just reading this thread… there is an option now?

Yes. Follow the instructions here...

Goosetuned Gen 3 Raptor (2021-2022) Pre-Order!


Alright, the time has finally arrived! Get your Gen 3 pre-order in ASAP, as there will only be 15 slots rolled out at the moment! (We will roll out additional slots daily as needed, and as we process orders).

On Tuesday 11/15/2022 (Next week), COBB will release Gen 3 Raptor with 2021 and 2022 support!

The ECU and TCM are now the same module, so there is no longer an ECU only Accessport version.


What’s required and how does it work?

Accessport Purchase
  1. Pre-order the Accessport w/custom tuning from us, here (https://www.goosetuned.com/.../gen3-2021-goosetuned...)
  2. A box will be shipped to you from COBB for you to remove and send in your ECU. Please do not remove your ECU until you receive this box from COBB!!
ECU Removal
  1. You must remove the ECU from the truck (5min process), PLEASE WATCH THIS VIDEO ON HOW TO DO THIS (https://youtu.be/cxS2riSdjaM) or read the attached PDF that COBB will send you once the box ships. I cannot answer PM’s on this topic at this time as there will be a big influx of questions.
Shipping ECU to COBB Tuning
  1. Once the ECU is removed and placed in the same box you received from COBB, take the premade *NEXT DAY AIR* label and ship back to COBB.
  2. You should receive your ECU back between 48hrs and 56hrs, Monday-Friday! (Essentially 2 days once it leaves your hands). Keep in mind this depends on your location (i.e city/rural) and UPS delivery driver/schedule.
Receiving the Unlocked ECU from COBB, and installing the Accessport that will come back with your ECU.
  1. Once you get your ECU back, install the ECU into your truck and start the truck. (Make sure everything starts ok)
  2. Email me your Accessport Serial Number. You will be replying to the email that I send out with instructions that you will have received the day of your purchase.
Accessport installation Instructions
  1. This will be sent to you via email day of purchase.
Custom tuning process (ETA 1-2 weeks after official release)
  1. I will reply to the same email with your custom tune file once created.
  2. You will upload the custom file to your Accessport, and flash the file to your truck.
  3. Follow email instructions for the logging process.
 

socal raptor

Full Access Member
Joined
Aug 4, 2020
Posts
122
Reaction score
132
Location
Los Angeles
Sorry if this is a dumb question but does @GooseTuned do something different than Cobb? I was under the impression Goose did his own tune, but was waiting on Cobb to unlock the ECU. It sounds like we are buying a Cobb tune right now? Don’t mean any disrespect just trying to understand
 
OP
OP
GooseTuned

GooseTuned

Supporting Vendor
Supporting Vendor
Joined
Aug 24, 2018
Posts
1,610
Reaction score
1,906
Location
New Mexico
Sorry if this is a dumb question but does @GooseTuned do something different than Cobb? I was under the impression Goose did his own tune, but was waiting on Cobb to unlock the ECU. It sounds like we are buying a Cobb tune right now? Don’t mean any disrespect just trying to understand

You are pre-ordering the COBB Accessport + my custom tuning (once available).

Will be available very soon. Within a couple weeks
 

FmaxTurboSi

Full Access Member
Joined
Feb 26, 2018
Posts
485
Reaction score
338
Location
So Cal
Sorry if this is a dumb question but does @GooseTuned do something different than Cobb? I was under the impression Goose did his own tune, but was waiting on Cobb to unlock the ECU. It sounds like we are buying a Cobb tune right now? Don’t mean any disrespect just trying to understand

with cobb, it's an "off the shelf" tune. Same tune for everybody. With goose, you get more of a custom tune. You'll data log, send him the info, he'll tweak your tunes for your personal truck. Plus you'll get world class customer service going with Goose. I used Goose for my gen2, and now I've preordered for my gen3. You won't regret going @GooseTuned. Just look at his following on this forum alone.
 
Top