GEN 3 Official Aftermarket Wheels Thread

[Keith88]

Anyone have any of these takeoff wheels?View attachment 392045

theres a guy on facebook market place here in Boise selling his for $5500 .... he started out at $8800.... I dont know if hes on crack or huffing paint.

 

[So-Cal-Al-52]

Geez, WTF. Some guys are idiots.

 

[hyrepower]

View attachment 391648

View attachment 391646

What lug nuts did you use and specs? I am thinking of getting a set of Mcgards, but wish for them to be a bit lower profile than the versions you are using.

 

[ChaseH]

These are the Gorilla lugs.

 

[hyrepower]

These are the Gorilla lugs.

Thanks. Those are my 2nd choice.

 

[ChaseH]

Thanks. Those are my 2nd choice.

Ive had both and I dont care what anyone says the Mcgards arent worth the extra money.

 

[hyrepower]

Good to know. I can see that as being the case. However I have read they are going to be about .352” shorter than the Gorillas. I really want them to be as short as possible for a cleaner look.

The Mcgards are 1.648” whereas the Gorillas are 2.0”.

What say you?

 

[Pacific Wheel]

Good to know. I can see that as being the case. However I have read they are going to be about .352” shorter than the Gorillas. I really want them to be as short as possible for a cleaner look.

The Mcgards are 1.648” whereas the Gorillas are 2.0”.

What say you?

I have gorilla 1.38" splines. They have worked on some method wheels since the method wheels are a thicker. But they did bottom out on Icon and Raceline from what I recall. If that happens you have to trim the tips of the studs or stick with the longer option. You may not have the issue with the 1.648" though

 

[MQZ]

Finally got a truck (not what I ordered) after 98 days of waiting! Long awaited shout-out to Justin @Pacific Wheel for the wheel hookup last fall. Budget set of 17x9 - 0 offset Vision Flow 351 Satin Black. Paired with Yokohoma Geolander Mt 35x12.50x17.

 

[RaptorMan703]

Is there a simulated beadlock 17” wheel with max 0 offset that looks close to stock? I was looking at KMC grenade but they appear to only be real beadlock. I want to get a machined beauty ring on them. Thanks