Reply to thread

Message: <blockquote data-quote="highway420" data-source="post: 2050169" data-attributes="member: 26764">OK.. baja designs had installed the sPOD for me along with the lights..-except the LPs.. all of them have used the spod's positive and ground connection which in turn goes directly to the battery.. so no use of random ground or hot wires at all. Have not even hooked up the 'trigger' connection for the sPOD..(using ignition activated wires to trigger an action within the pod.) the only somewhat factory connection would be the reverse S2's where you would use the trailer harness to T off for the reverse light trigger..By 'losing' ground, it will look like a short and completely turn off? Everything went blank.. everything.. no noises, no dummy lights.. event the shifter stayed in D.. which we know likes to default to park sometimes.interestingly enough, I tried to use an OBD II to read the truck... does that no longer work with these gens of computers? said no link 3 times. have not had a chance to connect to Fscan just yet. will try tonight if I can.If it's not the aftermarket equip.. then where should I be looking?thank you very much for replying to this, always appreciate your input.</blockquote>