RAM TRX - TRX-Forum.com Bronco Raptor - BroncoRaptorForum.com

Reply to thread

Message

[USER=6864]@full-race geoff[/USER] or anyone who has done work on these heads: How hard is it to pull the spark plug guide tubes?

I tried tapping on them with a rubber mallet and then just pulling/twisting on them by hand, but they’re not budging. I assume they need to be removed in order for Headgames to do their pocket port and valve job, but don’t want to mess something up if they aren’t supposed to be removed.

Will call Headgames mañana to ask too… They never answered my question about whether or not their “Raptor valves” are the SI valves. I assume they are, but want to confirm before the work is done.

[QUOTE="91Eunos, post: 2104208, member: 29616"] [USER=6864]@full-race geoff[/USER] or anyone who has done work on these heads: How hard is it to pull the spark plug guide tubes? I tried tapping on them with a rubber mallet and then just pulling/twisting on them by hand, but they’re not budging. I assume they need to be removed in order for Headgames to do their pocket port and valve job, but don’t want to mess something up if they aren’t supposed to be removed. Will call Headgames mañana to ask too… They never answered my question about whether or not their “Raptor valves” are the SI valves. I assume they are, but want to confirm before the work is done. [/QUOTE]

Staff online

Big Blue
Administrator

Forum statistics

Threads: 97,101

Posts: 2,048,309

Members: 61,030

Latest member: dreman07

Reply to thread

Staff online

Members online

Forum statistics