Unstoppable_robo
Member
Hey everyone, it was kind of hard to find much information on swapping the plastic oil pan to the metal one. Here is some info just incase if anyone was considering on doing the swap themselves. I managed to get the job done on my driveway. I am by no means a mechanic but i do like working on my vehicles as much as I can. Here is some part numbers for y’all.
Oil pan- ML3Z-6675-D
Oil pick up- LK4Z-6622-A
(3)bolts holding oil pick up- W503279-S437
For the most part the metal oil pan uses the same bolts as the plastic one except for 2. The part number for those are W503297-S900
As for the gasket I used https://www.permatex.com/products/g...ght-stuff-black-1-minute-gasket-maker-7-5-oz/
Here is a link that help me the most. If anyone has a question, I’m glad to answer them as best as I can.
www.f150ecoboost.net
Oil pan- ML3Z-6675-D
Oil pick up- LK4Z-6622-A
(3)bolts holding oil pick up- W503279-S437
For the most part the metal oil pan uses the same bolts as the plastic one except for 2. The part number for those are W503297-S900
As for the gasket I used https://www.permatex.com/products/g...ght-stuff-black-1-minute-gasket-maker-7-5-oz/
Here is a link that help me the most. If anyone has a question, I’m glad to answer them as best as I can.
Metal oil pan swap
Forgive me if this has been covered already. I did a quick search and didn’t come up with much. Has anyone swapped from the plastic oil pan to a metal one? I’m just over 100,000 miles my plastic oil pan is starting to leak. I do not want to put plastic back on here. Does the oil pick up tube...
