Reply to thread

Message: <blockquote data-quote="TurboFredro" data-source="post: 1276904" data-attributes="member: 27944">Got an odd post Forscan issue.I did a couple of mods, and all took just fine.Did:Global WindowsDRL Light switch to parking/turnTemp/Trans numbers above gaugesHeated Seats/Cooled Seats/HSW on Sync screenLincoln MirrorsAuto Start Stop DisabledAll took fine and worked as such, but I noticed my tailgate LED light that shines on the ground started to flicker after changing the DRL's, so I restored back to stock for that tweak, and it no longer flashed.  Also noticed that my center screen stays backlit after the truck powers down and doesn't shut off.  I restored all settings back to stock, and it is still staying backlit.  What's strange is if I shut the truck off after a run cycle, it powers down fine.  If I open a door after that, it does the raptor intro screen, then continues to stay backlit after the 8" gauge screen powers off.  It stayed on for over an hour before I decided to restart it, then close the door, then let it shut off like it should.  Opening the door seems to be the issue.If anyone has any idea what is going on, that would be fantastic.  I also noticed that the ECU would flash over my standard settings on its own.  As an example I would Flash the APIM 7D0-0101 line with AA2A 0103 0485 and it would write : AA2A 0103 04B5, instead.  What is going on here?Thanks for any help</blockquote>