Ford Emblem on Non-Applique Tailgate

[wesleywest]

Anybody know where I could find a replacement emblem that matches the "F150" and "Raptor"

The big blue emblem just doesn't match to my eyes. I've seen some on eBay for the 2016 model year F150, but I'm not sure those will work.

Any help is much appreciated.

 

[crash457]

http://www.fordraptorforum.com/f264/billet-badge-51040/

 

[Azholley]

Rappy graphics can get you any color you want.


Sent from my iPhone using Tapatalk

 

[Jeff-Ohio]

Anybody know where I could find a replacement emblem that matches the "F150" and "Raptor"

The big blue emblem just doesn't match to my eyes. I've seen some on eBay for the 2016 model year F150, but I'm not sure those will work.

Any help is much appreciated.

I ordered duplicate "Raptor" emblems from the dealer and installed them on each front door. I was charged $30 something for each "Raptor" emblem. Keep in mind that I am talking about the small emblem on the tailgate, not the vinyl graphics.

 

[ron.bumpus]

Anybody know where I could find a replacement emblem that matches the "F150" and "Raptor"

The big blue emblem just doesn't match to my eyes. I've seen some on eBay for the 2016 model year F150, but I'm not sure those will work.

Any help is much appreciated.

I ordered a gloss black badge with silver lettering on it on Ebay
downatthebuilding on eBay

 

[TheWolf]

Get some custom painted ones to any color you want.

Custom Truck Solutions




Here it is on the Explorer:

 

[shapiroeric]

How difficult is the swap?....Are there holes with double sided sticky tape?

 

[TheWolf]

How difficult is the swap?....Are there holes with double sided sticky tape?

I don't know how the emblem on the '17 is attached, but the '14 only had two posts with metal retainer clips, and you could remove it by getting a small screwdriver under and and pulling straight back.

My guess is the '17 has alignment posts and foam tape, as this was the case on the '16 Explorer. For that one, I used fishing line to "saw" through the tape, and since it had alignment posts, I had to saw with the line from all four directions.

 

[crash457]

How difficult is the swap?....Are there holes with double sided sticky tape?

There are alignment posts, clips and adhesive. It's not to hard to remove.

Line the area around it with masking tape to prevent damage to the paint
Heat the area to soften the adhesive
Pry up with a trim tool

 

[shapiroeric]

Thanks guys