F/S: [Group Buy] Rear Facing Amber Light Bar

[Deleted member 12951]

wonder what I could get to wrap those wires in....

 

[Slacker]

Paid, but I am not as patient. I like getting new shiny things!

 

[Big Blue]

wonder what I could get to wrap those wires in....

The Red/Black wires are connected so it's not spaghetti as it may look. I figure that with 12.5' of wire, most guys will run the wire down/under the rear seat under the floor mat, so you will see virtually no wire and have a factory look.

____________________________

Payment received updated on page 1, thanks guys. Once I get the remaining two payments I will order parts.

 

[Slacker]

BTW, you can eliminate the cigarette lighter plug on mine. Just leave the wire ends as they are. I will terminate it into my Whelen switch bank.

 

[Ftlombard]

I was thinking, I am not going to snowball so if someone who is needs the lights first and you are having issues making them in time, I can wait for mine if necessary.

 

[Blind1]

I like to get on this, but my first mod was to remove the blind spot center head rest from my Raptor. I'll be damn if I can find it, now. I guess I can copy your design but put one cyclone behind each rear passenger headrest.

Now, if I can only talk ole @IRONMAN with sending me his extra cyclone he pulled out of his chest. I'll be half way there.

 

[Slacker]

When you look at this pic you can see red wires from each of the lights to a hole in the mount:

http://i50.photobucket.com/albums/f324/Rube1966/imagejpg6_zps5b4309fe.jpg

That is what I am talking about covering up. Just that small part.

 

[Big Blue]

When you look at this pic you can see red wires from each of the lights to a hole in the mount:

http://i50.photobucket.com/albums/f324/Rube1966/imagejpg6_zps5b4309fe.jpg

That is what I am talking about covering up. Just that small part.

Gotcha. Good news is that pic was from my demo version, the improved your version has no visible Cyclone wires from behind. The single red/black center wire (in pic below) is what you will channel down the seat and will also not be visible. I also revised the final product version as a number of guys did not like the bracket touching/rubbing against the leather headrest that you can see in my demo version in your link.

This is from my front seat headrest, but to give you better perspective of no Cyclone wires...

 

[Deleted member 12951]

Is the red/black wires stuck together or are they two separate independent wires?

 

[Slacker]

From the pic they are together, but you can just pull them apart.