Eagle 012 in a +8

[EagleOffroad]

We are building 72 of each finish for this part number. (F150/raptor specific PN=93)
0122-8993 matte black with machined flange (gold hex bolts)
0128-8993 all matte black (gold hex bolts)
0127-8993 graphite metallic grey with black cap/hex bolts

Parts are being cast, they should be boxed and start shipping to our dist. locations in 3-4 weeks

 

[Dubless]

Awesome!

Now any shops on here AE dealers?? I'd like to pre-order a set!

 

[2manytrucks]

put a set on a Raptor so we can see them. Are you guys going to be able to sell them in various quantities like 5 or 6 (spares)??

 

[Labraptor]

Not sure what color you wanted pictures of but there are pictures of these on Kanarky's truck in post #20 in this thread.

Sent from my DROID4 using Tapatalk 2

 

[grantoser]

If methods are 0 offset and stick out 1.3 inches further than stock... How much farther do these stick out than stock in inches? Love the wider stance of the methods but like that these are American made.

 

[weimer]

Any updates on these? Wife has given me the okay to get wheels and tires.

 

[Chayse]

If methods are 0 offset and stick out 1.3 inches further than stock... How much farther do these stick out than stock in inches? Love the wider stance of the methods but like that these are American made.

With the +8 and a 9" wide wheel, the other edge of the wheel will be about 2-3mm closer to the body than a 0 offset 8.5" method wheel. You won't notice it without a way to measure it.

 

[grantoser]

With the +8 and a 9" wide wheel, the other edge of the wheel will be about 2-3mm closer to the body than a 0 offset 8.5" method wheel. You won't notice it without a way to measure it.

So the wheel they already had stuck out a lot farther?

 

[Sitdown]

Method compared to AE, Theyre not too far off stance wise, since the AE is a 9" wide wheel...The Method 8.5"/ET0 is only ~.1" wider stance

17x9 ET8 is ~5.3"BS...the 17x8.5 ET0 is ~4.7"... so .6" diff, all of which is inward toward the suspension. .5" coming from the 9" width (over the 8.5") and .1" more offset inward.

Compared to stocker 17x8.5 ET34 (~6.1"BS)... the AE is ~1.2" wider

 

[Chayse]

So the wheel they already had stuck out a lot farther?

Yes, the existing wheel at a -5 will be half an inch further out from the body. 8+5=13mm further out. Enough to make it rub.