Durability of a wrap

[rap67]

Hey there, I'm thinking of wrapping my raptor matte silver.
Can you power wash it with the wrap on or is it hand wash forever?

Thanks in advance

Marc

 

[Bulletnjm]

You should be fine with a pressure washer

 

[mikehoncho88]

Only problems you might run into are corners or edges peeling up, and that can be fixed. By pressure washer do you mean a drive thru carwash type, or just an industrial type pressure washer? Those vary a lot in how much PSI they put out, might want to check with your installer.

 

[bakkbakk]

id say car wash is fine if its not an inch away and as stated, those home/industrial pressure washers can skin a human in under a minute if you aren't careful

 

[Bulletnjm]

The wraps are wrapped around the panels to the back of them right? To keep the corners from pulling up?

 

[rap67]

Mine will be wrapped around the corners and the badges handles etc will be pulled and reinstalled after the wrap. I was referring to the Home Depot portable pressure washers. Mine is adjustable so lll start light. Thanks for the responses!!

 

[any joe]

I run mine threw car wash, power wash etc. Wraps hold up excellent. they took everything that wasn't part of the body of the truck off and then wraped it.

 

[gbrown27]

I pressure wash my wrap once a month and it holds up well. Just try to keep it squared up and not at too much on an angle near the edges

 

[rap67]

Thanks!

Sent from my iPad using Forum Runner

 

[W1N]

Do you guys know how well wrap handles cold weather? We see temperatures down to 20 below every now and then.