Do I have to add spacer for shocks for new wheels

[PJF]

When I get my 2018 Raptor does anybody know if I will need to adjust front shocks to except wheels 35x12.5x20? I had to go to mid perch on my 2013 and was just wondering if the gen 2 was the same. Thanks

 

[xrocket21]

No, very similar tire to stock other than the rim size. Depends on offset of course though.

 

[Pacific Wheel]

Depends on offset of course though.

This does make all the difference

 

[JetDriver480]

I have Toyo Mud Terrain 35x12.50R20 with a 20x9 +1mm wheel and I have just a little front end rubbing on tight turns, especially on compression. I am running a 1.5" RPG Collar for lift on the front end. The rubbing is a non-issue but I would definitely raise the front end if you plan on a near 0 offset and/or mud terrains.

 

[PJF]

No, very similar tire to stock other than the rim size. Depends on offset of course though.

Im going to install Fuel Trophy 20 inch and I think they have an offset of 20 but I may be wrong??

 

[JetDriver480]

Im going to install Fuel Trophy 20 inch and I think they have an offset of 20 but I may be wrong??

They come in a +20mm or a +1mm Offset. Personally I would go for the +1mm offset if you want your tires/wheels to stick out of the weeks about 1.5"... gives it a more aggressive stance that I like but some don't.

The 20mm offset will stick them out maybe .5" or so.

 

[Pacific Wheel]

These are 9 inch wide +20 for reference