DIY - Stock Raptor 2.5 Shock Rebuild.

[breezy]

Saw the PDFs but does anyone have a copy of the pictures from the first post? Also is the process the same for the 3.0s? (got those on my Gen 1)

 

[Derek50]

Just want to verify before I tackle this;
Do the shocks get 200 or 240 psi? I've seen both numbers quite a bit.

 

[BenBB]

Just want to verify before I tackle this;
Do the shocks get 200 or 240 psi? I've seen both numbers quite a bit.

The original spec was 240psi, later changed to 200psi (not sure if this is direct from Fox or if rebuild experience proved that less was "enough")...

 

[m3dragon]

It was seen the 240 blew out the shocks on harder hits.

 

[Forged Offroad]

Just want to verify before I tackle this;
Do the shocks get 200 or 240 psi? I've seen both numbers quite a bit.

200+ PSI. Factory spec from Fox is 200 and if it is lower than that you will get cavitation in the shocks.

 

[Derek50]

Thanks guys. I didn't really see much mentioned about flutter stacks in this thread. Is there someone that sells the flutter stack? Or do I have to get the shims from Fox and do some testing?

 

[Jason kitch]

Does anyone have links to the photos or I saw mention of video. I am not able to see any of these for what ever reason, maybe due to it being an old thread.

TIA

 

[BenBB]

Does anyone have links to the photos or I saw mention of video. I am not able to see any of these for what ever reason, maybe due to it being an old thread.

TIA

The YouTube video link in the very first post works for me, I reposted my pics on page 36&37 but unfortunately never saved the ones from @m3dragon's posts...

 

[Forged Offroad]

Does anyone have links to the photos or I saw mention of video. I am not able to see any of these for what ever reason, maybe due to it being an old thread.

TIA

What exactly are you looking for?

 

[Jason kitch]

mostly just wanting to see the picture for a visual, i watched the video and it gave me a visual of how to do the shocks.