Reply to thread

Message: <blockquote data-quote="Boss Hoss" data-source="post: 350208" data-attributes="member: 4168"><p>Just a FYI--yous is done but use a penatrating oil and let it sit for a while. WD40 is very marginal for this. Another hint and you have to be CAREFUL but on the farm equipment we have plow for example will put the torch on the area of the nut to just heat it up to around 200 or 250 (too hot will burn the oil carrier before it can soak in) then spray the penatrant oil on  both sides of the nut (let gravity do its job). After it cools in about an hour or so the nuts come off quite a bit easier almost everytime.</p></blockquote><p></p>