Normal
Yes, mostly correct. You need to find out what the overall tire height is...For example, I am running, along with several other members, the BFG AT 37x12.5x17 which measure in at 36.3, and when mounted and load put on the tires measure in just a tad over 35 inches...not all tires are created or sized equally. Do you research. And be prepared for some liner rubbing when turning and braking at the same time...nothing major, but be ready to trim if need be.I would stop asking whoever you are asking about putting 37s on a Raptor...i was able to drive around town just fine with just the mid perch setting on the front shocks with very minor contact of the tire to the liner. But I plan on off roading it so i did some good trimming behind the liner.
Yes, mostly correct. You need to find out what the overall tire height is...
For example, I am running, along with several other members, the BFG AT 37x12.5x17 which measure in at 36.3, and when mounted and load put on the tires measure in just a tad over 35 inches...not all tires are created or sized equally. Do you research. And be prepared for some liner rubbing when turning and braking at the same time...nothing major, but be ready to trim if need be.
I would stop asking whoever you are asking about putting 37s on a Raptor...i was able to drive around town just fine with just the mid perch setting on the front shocks with very minor contact of the tire to the liner. But I plan on off roading it so i did some good trimming behind the liner.
