RAM TRX - TRX-Forum.com Bronco Raptor - BroncoRaptorForum.com

Reply to thread

Message: <blockquote data-quote="Baja Designs" data-source="post: 1224949" data-attributes="member: 6006">Bailey here with Baja Designs.  I wanted to chime in and provide some quick information about what we do differently and why customers choose Baja Designs over the competition. [ATTACH=full]278235[/ATTACH]ClearView Optics- <a href="https://www.bajadesigns.com/science-of-lighting/clearview.asp" target="_blank">https://www.bajadesigns.com/science-of-lighting/clearview.asp</a>With more useable patterns than any other manufacturer, ClearView® provides you with a light for every zone and a scientific method to the madness.ClearView™ is our proprietary optics, which are computer designed in-house by Baja Designs’ team of racing engineers who have first-hand knowledge of the lighting needs of all types of drivers and riders. We don't use an Off-The-Shelf optic like lots of the competition.  The best thing is most patterns and colors can be changed in a matter of minutes with our uService Technology.[ATTACH=full]278236[/ATTACH]uService -<a href="https://www.bajadesigns.com/science-of-lighting/uservice.asp" target="_blank">https://www.bajadesigns.com/science-of-lighting/uservice.asp</a>Baja Designs unique use of O-ring seals instead of silicone allows users to change their beam pattern and lenses with ease. This makes for a quick and easy change between a variety of different patterns or colors. You have the ability to fine tune your lighting package to specific needs. Try that with our competitors and you'll be left in the dark without a warranty.[ATTACH=full]278237[/ATTACH]CopperDrive - <a href="https://www.bajadesigns.com/science-of-lighting/copperdrive.asp" target="_blank">https://www.bajadesigns.com/science-of-lighting/copperdrive.asp</a>BD’s CopperDrive LED management system uses next gen circuit board and driver technology to safely run high powered LEDs at 100% power. 4 levels of thermal management transfer LED heat up to 3000% more efficiently and provide an extra layer of vibration isolation creating the highest performing and longest lasting LED light on the market. We drive our lights at 100% capacity to make sure you're getting all of the performance needed.Manufactured in the USA - Another reason why our costs are higher than competitors is we try to keep as much as possible in the US. We average 65-75% US Content and our goal is to keep the number high. Here in San Marcos we have 3 CNC machines working on housings, bezels, end caps, for a wide variety of products from our S8 LED Light Bar all the way to the Lp9! The only things outsourced are very minor components where the cost would be too high to manufacture here (Rock Guards, Lenses, etc.)On top of this our LED/HID Lights are covered by a Limited Lifetime Warranty giving you complete purchase protection against manufacturer defects. This gives you peace of mind knowing you're covered for many years of use and abuse in the dirt or on the street. <a href="https://www.bajadesigns.com/help/warranty-policy.asp" target="_blank">https://www.bajadesigns.com/help/warranty-policy.asp</a>Above is just a few reasons why customers choose Baja Designs (BD) and why our costs are a little bit higher than most. We put nothing but quality components into our lights in order to provide you with the best lighting in the industry that will last many years. If the above information isn't enough to convince you that we are different than "the other guys" I'd like to invite you to our Shop for a tour.  We are happy to show you the day to day operations here and the hard work that goes into our products.  -Bailey, Baja Designs<a href="http://www.bajadesigns.com" target="_blank">www.bajadesigns.com</a></blockquote>

Verification

Staff online

Big Blue
Administrator

Forum statistics

Threads: 96,846

Posts: 2,042,822

Members: 60,799

Latest member: daniel805

Reply to thread

Staff online

Members online

Forum statistics