Reply to thread

Message: <blockquote data-quote="roger7254" data-source="post: 2070410" data-attributes="member: 65441">I’ve been running the 23 37PP with SDI tophat and 1.5" Eibach springs (Non-HD springs) for about five months now. The ride is still very close to factory ride.<h3>Photos:</h3> <ol> <li data-xf-list-type="ol">First picture: Side view of the current setup with the SDI tophat and 1.5" Eibach springs.</li> <li data-xf-list-type="ol">Second picture: SDI tophat with factory springs and UCA. (Factory UCA angle was too low)</li> <li data-xf-list-type="ol">Third picture: with new RPG UCA.</li> <li data-xf-list-type="ol">Last picture: Eibach 1.5" Non-HD springs in rear.</li> </ol>While this setup works well overall, I’m thinking about switching to Foutz tophats with Geiser springs on all four corners. The Geiser springs are about 10% stiffer, which is what I’m after since my current setup leaves the front end too high when I load up the bed.Hope this helps anyone considering similar changes!</blockquote>