GEN 1 3rd brake light repair

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Dane

FRF Addict
Joined
Sep 20, 2011
Posts
2,201
Reaction score
779
Location
Littleton, CO
There are a lot of cheap recon/ amazon options for less than 100 but do to plug in the same and I've heard mixed reviews from most of them. The stock part is about 90/ and for less than 200 you could have a stock set up with better cargo/ break lights - the other updated one from above has LED's, stock part, but not sure why more people haven't just updated ? Rock auto is cheaper than the Tasca below

https://www.tascaparts.com/oem-parts/ford-high-mount-lamp-al3z13a613g/?c=Zz1lbGVjdHJpY2FsJnM9aGlnaC1tb3VudGVkLXN0b3AtbGFtcCZpPU1BMDk5NTU1JnI9MSZhPWZvcmQmbz1mLTE1MCZ5PTIwMTAmdD1zdnQtcmFwdG9yJmU9Ni0ybC12OC1nYXM=
I have the Recon one. So far it has worked fine. Couple things though, the instructions are worthless. Throw them away, they are flat out wrong, missing a wire, etc. I used a voltmeter to figure it all out. You do have to cut and splice - no plug and play. The fit seems weird, but I siliconed it all, and it seems fine. It's a very different looking light though. It's far from stock. I'm sure some like it, and some might not, but it doesn't have those three lights - it has a different almost icon type thing, then a different brake light, and LED cargo lights.
 

W84

Member
Joined
Apr 25, 2020
Posts
22
Reaction score
6
Location
Hawaii
Appreciate it - pretty much what I read about the wiring. I ended up going with a stock 3rd from rock auto & and got LED bulbs.. couldn't be happier for the money
 

SVTRaptorGT500

Active Member
Joined
Jul 8, 2019
Posts
58
Reaction score
19
Location
Houston, TX.
I have the Recon one. So far it has worked fine. Couple things though, the instructions are worthless. Throw them away, they are flat out wrong, missing a wire, etc. I used a voltmeter to figure it all out. You do have to cut and splice - no plug and play. The fit seems weird, but I siliconed it all, and it seems fine. It's a very different looking light though. It's far from stock. I'm sure some like it, and some might not, but it doesn't have those three lights - it has a different almost icon type thing, then a different brake light, and LED cargo lights.
I am also looking at the recon 3rd brake light. I purchased a new factory 3rd brake like for 350 ... And about a yr later one of my LEDs is out. No way I'm paying another 350. I see a recon light for 116. But I don't know how to wire it. Can you post your method? Thanks!
 

EricM

FRF Addict
Joined
May 11, 2016
Posts
3,483
Reaction score
3,215
Location
OHIO
I am also looking at the recon 3rd brake light. I purchased a new factory 3rd brake like for 350 ... And about a yr later one of my LEDs is out. No way I'm paying another 350. I see a recon light for 116. But I don't know how to wire it. Can you post your method? Thanks!
He said he used a volt meter. That means you go one by one and figure out what each wire on the stock harness does using a meter. Have someone hit the brakes on and off and find the wire where the voltage is going from 0 to 12V and back to 0. Repeat for all wires until you know what they all do. Then figure out all the wiring on the new one, possibly using a separate 12v source to power it if needed.
 

Jhollowell

Full Access Member
Joined
Mar 14, 2016
Posts
808
Reaction score
818
Location
Everett, wa
i just replaced my recon with a GJ but i did make note of the factory wires.

Factory Harness
Black - Cargo
Red - Brake
Yellow - Ground

Hopefully the Recon tells you what wires go where. i had 3 sticking out of mine, red, black and white but don't know which is which. trial and error will probably get it.
 

Dane

FRF Addict
Joined
Sep 20, 2011
Posts
2,201
Reaction score
779
Location
Littleton, CO
He said he used a volt meter. That means you go one by one and figure out what each wire on the stock harness does using a meter. Have someone hit the brakes on and off and find the wire where the voltage is going from 0 to 12V and back to 0. Repeat for all wires until you know what they all do. Then figure out all the wiring on the new one, possibly using a separate 12v source to power it if needed.
^ This. It isn't bad, there are only a few wires. At the time Recon had totally incorrect instructions - which is worse than no instructions. Maybe they have corrected that by now, but I don't trust them. Multi-meter only takes a couple minutes. Test light would work too.
 

Dane

FRF Addict
Joined
Sep 20, 2011
Posts
2,201
Reaction score
779
Location
Littleton, CO
i just replaced my recon with a GJ but i did make note of the factory wires.

Factory Harness
Black - Cargo
Red - Brake
Yellow - Ground

Hopefully the Recon tells you what wires go where. i had 3 sticking out of mine, red, black and white but don't know which is which. trial and error will probably get it.
So there should be one more for running lights. Process of elimination works here though! I'm a super big fan of the black wire being a hot wire... Go go engineers!
 

Jhollowell

Full Access Member
Joined
Mar 14, 2016
Posts
808
Reaction score
818
Location
Everett, wa
Yes there is a 4th wire but i couldn’t remember the color or what it was for. It wasn’t hooked up to anything when i pulled the recon and it’s not hooked up now. I was too lazy to pull the light and check the color but having 3 out of the 4 makes process of elimination easy.
 
Top