2017 Raptor Geiser Progressive Springs

[ogdobber]

I am really curious as to how these springs ride? Will the ride be firmer, softer, initially softer and progressively get firmer, etc... Depending on the answer, how much softer or firmer? I would love to get the truck sitting up a little higher and squeeze some 37" tires in there. How much work is involved to install the springs?

From the website sounds like low perch ride with top perch height. Easy install, just need a spring compressor


Sent from my iPhone using Tapatalk Pro

 

[Jeff-Ohio]

From the website sounds like low perch ride with top perch height. Easy install, just need a spring compressor


Sent from my iPhone using Tapatalk Pro

Thanks for the response. I just need further confirmation on how the truck will ride. I believe I recall hearing a few people complain that their truck was too bouncy with Geiser springs, but do not quote me on that; I may have that mixed up with something else. All said and done, if I could get a slightly softer ride, or keep it the same, with two more inches of ride height, that would be wonderful.

 

[Skyline]

lurking, curious for some feedback on these

 

[dude1782]

Thanks for the response. I just need further confirmation on how the truck will ride. I believe I recall hearing a few people complain that their truck was too bouncy with Geiser springs, but do not quote me on that; I may have that mixed up with something else. All said and done, if I could get a slightly softer ride, or keep it the same, with two more inches of ride height, that would be wonderful.

Nobody has said that because they just came out


Sent from my 2017 Raptor using Tapatalk

 

[Jeff-Ohio]

Nobody has said that because they just came out


Sent from my 2017 Raptor using Tapatalk

That is true for the Gen 2. I believe the comment was in regards to a Gen 1, and if so, that bounciness issue still may not correlate to what they are offering for a Gen 2.

 

[dude1782]

Everybody likes the gen1 springs. The whole point of these springs is that they are progressive and improve throughout the suspension cycle. The initial spring rate will help for small bumps and the progression will help when pushing harder.

If you're looking for gen1 feedback there's plenty of information already on here in the gen1 section.

 

[Johnny]

Gen1 and Gen2 springs are IN STOCK, here @ UTV INC and ready to ship:

website links to buy:
GEN 1:
https://www.utvinc.com/geiser-offroad-products-ford-raptor-f150-progressive-front-springs-2-lift/

GEN 2:
https://www.utvinc.com/geiser-offro...raptor-f150-progressive-front-springs-2-lift/

Kits are in stock and shipping daily!! Get em while we got em!! They are going quick!!

 

[Skyline]

Curious if anyone has time on these yet? Heard of some CV angle problems with certain collars, and wondering how the CVs look with these springs.

Thanks

 

[murph145]

Getting these installed next week, hopefully. Springs are sitting here at my office.

Most likely will be upgrading my Upper Control Arms at the same time.

Will keep you posted.

---------- Post added at 04:12 PM ---------- Previous post was at 04:10 PM ----------

Gen1 and Gen2 springs are IN STOCK, here @ UTV INC and ready to ship:

website links to buy:
GEN 1:
https://www.utvinc.com/geiser-offroad-products-ford-raptor-f150-progressive-front-springs-2-lift/

GEN 2:
https://www.utvinc.com/geiser-offro...raptor-f150-progressive-front-springs-2-lift/

Kits are in stock and shipping daily!! Get em while we got em!! They are going quick!!

Johnny, what's your thoughts on needing to change out the UCA's? Got my springs just want to make sure I do it right the first time. Thx

 

[Johnny]

No UCA on ours:

---------- Post added at 06:20 PM ---------- Previous post was at 06:15 PM ----------

Curious if anyone has time on these yet? Heard of some CV angle problems with certain collars, and wondering how the CVs look with these springs.

Thanks

No issues on mine.. grey truck in the photo above... 10K miles. On & offroad.