20 x 9.5 with +15 offset rubbing issues?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

CanuckRaptor

Active Member
Joined
Aug 15, 2016
Posts
59
Reaction score
28
I'm planning to go this route:

20 x 9.5 +15, using 35 inch BFG KO2 tires, will I have rubbing issues?

Thanks guys
 
Last edited:

brettmess24

Full Access Member
Joined
Dec 13, 2014
Posts
990
Reaction score
390
You mean 35? They will rub the inner plastic but not terrible.


Sent from my iPhone using Tapatalk
 

NASSTY

FRF Addict
Joined
Aug 19, 2016
Posts
2,582
Reaction score
3,067
Location
ME
Nope..

They will stick out .79" further than stock.

Stock offset is 35mm. So this would be a 20mm difference.

Nope, you didn't factor in that the new wheels are 9.5" wide and the stock wheels are 8.5" wide. :biggrin:
 

AndysLog

FRF Addict
Joined
Jan 12, 2017
Posts
1,125
Reaction score
527
Location
Moro IL
****** slinging **** in this thread.

still cracks me up most people go full retard when it comes to wheels.
you should get the 33s.
 

ChevyChad

Full Access Member
Joined
Dec 20, 2016
Posts
535
Reaction score
233
Nope, you didn't factor in that the new wheels are 9.5" wide and the stock wheels are 8.5" wide. :biggrin:

Doesnt matter. The CENTERLINE of the wheels and tires will be .79" out further. And since the tire is wider than the wheel, then the outer most part of the tire will be .79" out further.

---------- Post added at 09:18 AM ---------- Previous post was at 09:02 AM ----------

The wheel will be shifted out further than the tire will be shifted out, but what really matters is the total difference in centerline- which is the difference in offset. Hopefully you can make sense of this example:


http://www.fordraptorforum.com/1158642-post581.html
 
Top