RAM TRX - TRX-Forum.com Bronco Raptor - BroncoRaptorForum.com

Reply to thread

Message: <blockquote data-quote="Cody Templeton" data-source="post: 2060500" data-attributes="member: 45015">Continued:[ATTACH=full]466776[/ATTACH]Probably the dead giveaway that it's the incorrect unit is the fact there's no socket for the APIM to bolt to on the back of the unit, and also that it didn't come with brackets to relocate the DSP module (CD receiver) down further in the radio pocket. Looking at the harness I'm going to believe that it's probably for a 13-14 truck with Sync 1, but without seeing the wiring harness on a Sync 1 truck I'm unsure. There was a handful of updates since the Android 9 unit, like the addition of external 2.4 and 5ghz WiFi antennas, SIM card slot cable, a much larger screen, the processor being quite a bit faster, and the screen resolution is much higher as well. Here's a photo of the new unit installed:[ATTACH=full]466777[/ATTACH]Current thoughts after having it in for about a day - they have definitely been able to work a lot of the kinks out of these units since they first starting using them back when I installed my PX6 unit. They boot and operate MUCH faster, the screen colors and definition is far better, and the overall system layout is much better as well. At the time I put the original unit in I was very pleased with it after I updated the firmware to fix a bunch of the initial bugs, but this one just took it even further on how nice it really is. I still need to adjust some of the settings and such with it, and get my automation setup on my phone for it, but man it's so nice to have it fully working!</blockquote>

Verification

Forum statistics

Threads: 96,819

Posts: 2,042,138

Members: 60,779

Latest member: yanni777

Reply to thread

Members online

Forum statistics