Normal
[ATTACH=full]270115[/ATTACH][ATTACH=full]270116[/ATTACH][ATTACH=full]270117[/ATTACH]---------- Post added at 10:15 PM ---------- Previous post was at 10:00 PM ----------I did wire them individually to turn on one at a time. Use upfitter 3 and 4 (10 amps each) since the lights are rated at 3.8 amps each. Circuit sizing recommends 135% of full amp rating. That would be 5.1 amps at 75 degrees F. Since the will end up running hotter (summer heat, light heat, motor heat) the recommendation is 15-20% for every 30 degees or so. I dont remeber exactly. I used the 10 amp upfitters just to be conservative. [ATTACH=full]270118[/ATTACH]
[ATTACH=full]270115[/ATTACH]
[ATTACH=full]270116[/ATTACH]
[ATTACH=full]270117[/ATTACH]
---------- Post added at 10:15 PM ---------- Previous post was at 10:00 PM ----------
I did wire them individually to turn on one at a time. Use upfitter 3 and 4 (10 amps each) since the lights are rated at 3.8 amps each. Circuit sizing recommends 135% of full amp rating. That would be 5.1 amps at 75 degrees F. Since the will end up running hotter (summer heat, light heat, motor heat) the recommendation is 15-20% for every 30 degees or so. I dont remeber exactly. I used the 10 amp upfitters just to be conservative.
[ATTACH=full]270118[/ATTACH]
