rattle

Had the iwe line replaced about two month ago because it did a grinding sound at low speeds when not in 4x4 Now it does a similar sound but going over 60mph on the freeway … can hear it even more when next to a semi truck as it echos louder maybe bad iwe vacuum like again ? But too recent ...

Apologies for yet another cam phaser post, but here goes. Got a P0022 code (camshaft Position A - Timing Over-Retarded) and took truck to dealer. Dealer confirmed cam phaser and ordered parts Tuesday June 27th. I have 62k on the clock and never heard the rattle. Dealer even confirmed it was...

I have a 2023 Gen 3. I have a sporadic clicking or light tap that I'm hearing in the back seat of the truck. It occurs when I have larger dips/bumps in the road. Hard to video record but will try. I have: removed the under seat storage completely, removed the jack, and it persists. I've...

So my horizontal (exhaust?) pipe under truck has been rattling. Discovered hose clamps were rusted so heat shield is banging around. Curious as to what size clamps anyone used to retighten and if there’s anything else I should think of before fixing. Does not look like I could do OEM replacement.

I’ve heard this rattle for a few days now. Some days it’s a little louder, I don’t think it’s anything that would keep the truck from being operational, but it is annoying to say the least. It doesn’t sound like it’s coming from the waste gate? But perhaps it is? The video I captured in idle...

Besides having cam phaser and wastegate rattle, I have another rattle that sounds like something hitting a hollow bar. It is most prominent while the truck is cold and just starting to drive. Has any else had this and know/have an idea of where it could be coming from? I’ve crawled underneath...

I’ve been chasing a rattle for a few weeks now and I can’t seem to find where it’s coming from. It only happens when the engine is cold and the rattle increases with RPMs(typically lower RPM range. I’ve had the cams replaced with the new design back in may. Took the truck to Ford they had it for...

Had to type up a laundry list to give the dealer as I was sure to forget something.

2019 Gen 2. 51k miles. First rattle back when ended with the cam phaser replacement. Wastegate rattles on cold start as well. And now this… at low speed, low rpm, after accelerating ever so slightly…when I let off I get this metallic rattle from somewhere underneath what sounds like the drivers...

So my recently purchased 13 Screw just started making the same damn sound my 11 expedition EL Limited has been making for the past year. Obviously it's continued to get worse and worse in my Expedition, would really like to solve whatever it may be before it gets worse in the raptor. Gonna link...

Good morning, First-time poster here so please bear with me. Recently transitioned from a 2016 King Ranch to a 2018 Raptor. Love the truck, the ride the size, etc. it's all great. But there are a few rattles that are baffling and worrying me. The first deals with a grinding/rattling/metal cans...

Hi all- I have a 2020 Gen 2 raptor with 20k on it. I’ve recently noticed a rattling noise in 1st to 3rd / 4th gear when under light load starting up. I don’t hear it consistently, but when driving through narrow streets where echoes reverberate off of parked cars - you can tell something sounds...

Hey Everyone, Wanted to see if anybody has heard this rattle before. It's on a 2018 Gen 2 Raptor. 38k miles. Skip to 1:20 and play till 1:40 to hear it. The whole video is trying to catch the sound for the dealer but figured I would try here to see if anyone else has had this rattle...

Well, I will try to make this as short as possible. I’ve searched similar threads but figured I’d make my own and provide my own videos. Long story short, took my truck in a few weeks ago for warranty work (Esp 100K PremiumCare Warranty) 3 small leaks & drivers side seat heaters. Well while it...

My Raptor is a 2018 802a, early build date (Nov 2017), approximately 42K miles, replaced cam phasers in March 2020. No tunes, all stock. I rarely get on the gas in this truck, drive it pretty easy. About July 2020 , approximately 10-20 seconds after start-up, a clicking noise starts. I...