37’s

I have a 2018 SCAB been getting the suspension dialed in the way I like. Now I’m looking into bumpers and performance parts. Seems like for most of these aftermarket bumpers require the intercooler to be moved. So I’ve been looking into the ADD top mounted intercooler. Seems like a quality...

My stock set of KO2’s are about done for and looking into my options. The KO2’s aren’t horrible but something that is better in the rain and maybe a little more aggressive wouldn’t hurt. I’ve got leveling springs going on too. So I’m open to either a 35 or 37. My dilemma is finding a tire that...

Will the 2.5 Fiberwerx get you there alone on the Gen 1? Looking for more after taking it hard off-road for the first time. What’s the best way to get more without spending 30k right away? Looking to make this a Mid/Long travel project long term but looking for a little more for the next...

Been looking into leveling the truck and there is a lot of options from collars- Eibachs - Geisers. Leaning towards the Geisers due to them being progressive. I haven’t decided if I am going to just run 35’s or 37’s. The truck isn’t jumped or offroaded. Mainly just like the look and it’s a it’s...

Hey FRF'ers check this out. After too many beverages on memorial day I decided it was time to post a random thread to the tire forum. In the picture below, a stack of used 35x12.50R17 Toyo MTs (about 3000 miles) against a new set of 37x12.50R17 Toyo MTs. I found it interesting that the old...

I have been very impressed with the 10 ply 35x12.5r17 Toyo MT while offroading. I can say without exaggeration that they held up after taking a boulder hit at 40mph which wrecked my passengers side frontend and ground a deep grove into the side wall due to the UCA rubbing against it. After...

I have a 2018 screw cab with 17inch methods and 37 inch nitro ridge grapplers. My rear driver side tire is always rubbing on the fender, causing it to pop out of the knuckle... anyone have this issue ? How can i fix it without adding a leaf ? I hate having the rear higher than the front..