Search results

hi guys, so as the post says im trying to switch from cloth seats to leather seats on my ex boder patrol raptor. i already purchased the front and back seats, which i think i got for a good deal. ($500). my major question is has anyone done this before and were there any issues i might run into...

update: the truck has not stalled since 10/27/2022 and the date today is 11/10/2022. The only thing i did to the truck since that day was change out the fuel relay (not fuse 27) and fix the iwe vacuum lines that were damaged. drove the truck for 2hrs the other day in stop and go traffic and in...

so you think it might be your AC clutch? i actually moved a few relays around and so far no stalling also. i replaced the fuel pump relay (not the fuse 27) and so far no stalling. i havent been using the AC though since its been fresh so im not sure if it could also be the AC compressor.

i havent replaced the FPDM but all readings from the fuel seem to be constant. my power steering pump has no noise and is smooth. also did an evap check and it still died. when we clear the KAM or disconnect the battery, the truck runs alot smoother but eventually goes back to how it was driving...

yes i have done relearn. using Ford IDS we clear the Keep alive memory and let it idle and relearn everything. all throttle body's were OEM motorcraft. when we tried putting the aftermarket one from standard it would automatically set off the wrench light and turns out the tps readings were...

sounds like you are on the right track. my truck randomly gets the wrench light followed by the p2111 or p2112. if i turn the truck off and turn it back on the light goes away and drives like nothing happened the code clears up pretty quickly. its funny you also get a random blip because i get...

if it was a crank sensor, im sure we would see some type of code. i dont think its that. my bet wiring somewhere is bad. i am gonna look to see if my ac compressor might have anything to do with it. i know its going bad but im unsure if thats the problem

do you think a bad ac compressor would be causing the random stall even when the AC is not running?

same here. the truck runs amazing until it decided to randomly rough idle and stall out

i did the fuse recolation and the problem is still there. im thinking maybe a bad fuel pump that shorts out or is not sending enought fuel. i have no codes for a bad fuel pump tho

did your truck stall out too? or was it just idling like if it was sucking up air?

i did the same thing by going out side and pumping the brakes and the pedal went down once i started the truck up. so it might not be bad, but like you said, there is other lines that go into the check valve. i replaced my throttle body with 2 other oem ones that were known to be good and still...

i cant replicate my issue like clock work but it does do it more often after its been running for a while. i work and commute locally so its hard for me to get it to replicate the issue all the time; sometimes it wont do it all day. funny thing is that mine did the same thing today in the...

thanks for the reply. i have a b10f1 coming from the BCM but i dont think that would make the truck stall out. from my understading that code wont make the truck stall out. ive checked some wiring but not sure where to start for the most part. it does not help that this truck is a prior law...

Hi everyone, im reaching out to you guys because i am lost on what can cause a random stalling issue. i have a 2012 6.2 ford raptor that randomly stalls on me, it stalls as if i turned off the igniton. when it stalls i put it in park and turn it back on with no problems. sometimes the truck...

the one i purchased came from el centro border patrol and it definitely has some stories to tell. i purchased this truck in san diego and drove it home about 150 miles and had no problems. it wasnt until the next day that i started having these issues. i did the fuse 27 relocation last weekend...

thank you for the reply. i checked around for any bad wiring, i unplugged the pcm and checked the connectors and everything seemed ok. im going to have to take it to my mechanic so they can check the voltage and all that. im hoping i dont have to get a new pcm. im not sure how much a dealer...

Hi guys, i own a 2012 Gen 1 6.2 raptor with 145,000 miles on it. i recently purchased this truck and it was a prior border patrol truck. when i bought the truck it had a strange idle issue where it felt like a slight misfire, but i thought it was vacuum leak or something since the idle would...

thanks for the replies. im looking at either going aftermarket wheels or these but not too sure yet. i was looking at some 20inch wheels but i feel thats too big and ill loose tire size

im looking to buy some wheels for my 2012 for raptor. i was wondering if these wheels would fit? they are from a 2018 ford raptor. the tire size they have on them are 35x12.50x17 . i dont want to purchase these if they wont fit. my raptor is all stock and the front is at mid perch. any help and...

yea they are not cheap at all. but going with the fox shocks was cheaper than going with icon or king shocks. for the moment im trying to get it running how it should and later ill focus on upgrading to better shocks.

it was all fun until i hit 70 on the fwy. wont be doing that again

I think i got a fair deal on it. i did mention to the dealer that it was missing the rear shocks and was told that it was because they modified the truck differently since it was a border patrol truck. i wasnt buying his excuse but i was able to find the rear shocks locally and saved myself the...

thanks! i really appreciate it

thank you guys. i found a guy selling some so im going to check the part number to make sure its off of a screw. i really appreciate the info and the help. im new to the forum and the raptor community.