Search results

I just use Waze. It works while in motion and is a better solution in my opinion.

Has anyone been able to get the oil temp numbers on the display. I have the 3, just not the oil. Thanks

No, adaptive lighting is the headlights moving in the direction of steering. Steer left, lights move a bit to the left. Same with right. When you add the feature through Forscan, you will see a selection for 'anti-glare lighting'. It is not there otherwise.

I never got a response to this, anyone how to add oil digital temp? Any idea why it says 'do not use dig oil temp?'

I have some factory 2022 35” wheels that I just took off at 500 miles if you are interested. Replaced with 37’s. I’m in Michigan. You are welcome to make an offer if you choose to go this route.

I had the same issue, until I changed bottom center pick to VDM, then it worked. I could not find a procedure on how to do this, so I sort of figured it out by myself. If anyone has a link to a procedure for the Gen 3, that would be great. Attached are pictures of the Height before, VDM part...

I just bought some factory new 37's for my 2022 Gen 3 Raptor 35. I'm going to add 1.5" perch collars and reset ride height as explained above. I'd like to reset the speedo in ForSCAN. I understand lines that need to be adjusted are 726-15-01-xxxx xxxx **xx and 726-15-02-**xx xxxx xxxx. Does...

I was able to add the Transmission digital temp and the water digital temp, but is there a way to get the oil digital temp as well on the top gauges? I see in the google doc files on IPC 720-07-01-xxxx-****-xxxx is says Oil Dig Temp do not use.... is there somewhere we can turn this on...

OK, so I apologize if this has been covered, but I cannot seem to find it after reading through threads for at least the last 2 hours. I have a Gen 3 Raptor and I want to keep the headlight switch in auto and have the 3 grill indicator lights on all the time (just like my Gen 1, BTW), as well...

I had the same issue on my gen 3, but got it to work. I removed the tail lights and you can access the back side of the hole that does not have a weld nut. I used a couple of washers as spacers, and a larger fender washer and a lock nut for the included shoulder bolt and it worked fine. Just...