Search results

  1. Adam Miller

    Where does this go?

    Job done.
  2. Adam Miller

    Where does this go?

    Thanks a ton. With the suction from the fresh grease, trying to pull the axle out again was almost as bad as the first time. But I definitely wanted to do it the right way. Axle replaced, and new disc/caliper.
  3. Adam Miller

    Where does this go?

    So I'm replacing the CV axles on my 2010 6.2. Finally get the passenger side off and new one in...and find this o-ring right underneath. It's about 1 3/8". Too big for the hub. Did it fall out of the UCA ball joint, the tie rod end, or somewhere else in the hub?
  4. Adam Miller

    Moab, Manti La Sal, Ouray, Telluride, Gunnison

    In actuality, I went from Ophir, bypassing nearby Telluride and immediately west over the Manti La Sals into Moab/Canyonlands for 4 or 5 days, then started back east to that pond I posted earlier for 4 days. Continued east to Telluride to give Imogene Pass another try. Unlike Ophir, Imogene is...
  5. Adam Miller

    Moab, Manti La Sal, Ouray, Telluride, Gunnison

    We're not in chronological order here--Montrose/Ouray were basically the first places on my trip and I camped at altitude south of town on the road up to Imogene Pass. They got a little bit of rain and snow the night before I was going to do Imogene, so I had to reroute to Ophir Pass via the...
  6. Adam Miller

    Moab, Manti La Sal, Ouray, Telluride, Gunnison

    Just realized I didn't take many photos this trip--especially of the Ouray and Telluride. Both cool towns--moreso for Ouray. The size and steepness of the mountains on either side cannot be captured by photos anyway.
  7. Adam Miller

    Moab, Manti La Sal, Ouray, Telluride, Gunnison

    ...where I found a campsite with my own private lake (more of a pond really) at a little over 10,000 ft. The fly fishing was good at dusk, Threw all of them back except one. The last pic is a larger lake, but didn't camp there.
  8. Adam Miller

    Moab, Manti La Sal, Ouray, Telluride, Gunnison

    From Moab, I moved just a few miles southeast, up into the Manti La Sal range...
  9. Adam Miller

    Moab, Manti La Sal, Ouray, Telluride, Gunnison

    More from Gemini Bridges, White Rim, and one of my camping spots in Bride Canyon (just west of Arches NP).
  10. Adam Miller

    Moab, Manti La Sal, Ouray, Telluride, Gunnison

    Each year I do a 2 week dispersed camping trip with the 2010 6.2. In 2020 it was the Moab/southern UT area, 2021 was around the Yellowstone/Tetons area, 2022 was Big Bend, and a few weeks ago I did Moab/Colorado again. I do other smaller or less camping-focused trips as well, such as the...
  11. Adam Miller

    Set (4) ofGen 1 beadlock capable wheels

    No, they are long gone.
  12. Adam Miller

    GEN 1 Can't shift out of Park, Starts/runs fine. Dash works but everything else electrical is off.

    The Smart Junction Box was bad.
  13. Adam Miller

    GEN 1 Can't shift out of Park, Starts/runs fine. Dash works but everything else electrical is off.

    Found an old bluetooth ODB2 that seems like it is going to work--although it isn't switchable. the other one was a piece of junk.
  14. Adam Miller

    GEN 1 Can't shift out of Park, Starts/runs fine. Dash works but everything else electrical is off.

    Fuse 46 was fine as well. Can't get FORScan to connect. Tried both positions on the OBD2, plugging/unplugging, closing and restarting forscan, etc. This is the OBD2 I bought. https://www.amazon.com/dp/B094QHZ77F/?tag=fordraptorforum-20 There is no driver being installed...should there be?
  15. Adam Miller

    GEN 1 Can't shift out of Park, Starts/runs fine. Dash works but everything else electrical is off.

    I checked fuse 45...but looks like I need to check 46. And I forgot to bring my laptop home from work tonight--doh!
  16. Adam Miller

    GEN 1 Can't shift out of Park, Starts/runs fine. Dash works but everything else electrical is off.

    I have not checked those. I haven't been in there doing anything else, but I'll check anyway. On a complete tangent, but am I able to disable the TPMS warnings through ForScan? When I bought the beadlocks and new tires last year apparently I bought and installed the wrong sensors.
  17. Adam Miller

    GEN 1 Can't shift out of Park, Starts/runs fine. Dash works but everything else electrical is off.

    Downloaded ForScan. The cable just arrived, so I'll scan it tonight. The gearshift assembly should arrive at the local dealer tomorrow. I didn't order the BCM yet, but another Chicago dealer has one in stock, if necessary. Where does that Parkin Interlock Solenoid go though? I can't find...
  18. Adam Miller

    GEN 1 Can't shift out of Park, Starts/runs fine. Dash works but everything else electrical is off.

    I have the HF ZR13m but didn't see any codes. I don't think it reads all the modules.
  19. Adam Miller

    GEN 1 Can't shift out of Park, Starts/runs fine. Dash works but everything else electrical is off.

    Battery reset did not work. I picked up a new shift interlock solenoid, removed the console, and undid the 4 bolts holding the shifter assembly in place. I did not see the part matching the solenoid--is it deeper down or somewhere else? What I did find though, was the broken off little curved...
  20. Adam Miller

    GEN 1 Can't shift out of Park, Starts/runs fine. Dash works but everything else electrical is off.

    I haven't. I suppose it couldn't hurt. If that doesn't work then I have a shift interlock solenoid arriving tomorrow. And if that doesn't work I've got a new BCM waiting in an online shopping cart.
  21. Adam Miller

    GEN 1 Can't shift out of Park, Starts/runs fine. Dash works but everything else electrical is off.

    In searching, I notice that it lists the BCM as part number AL3Z-15604-D for 2010 and BL3Z-15604-A for 2011, and that's ALL Ford vehicles for that year. Sounds like I would indeed want the one for 2010, but I'm just checking since it is the 6.2. By the way, it's not the brake pressure switch...
  22. Adam Miller

    GEN 1 Can't shift out of Park, Starts/runs fine. Dash works but everything else electrical is off.

    Doesn't disengage and doesn't even make a sound.
  23. Adam Miller

    GEN 1 Can't shift out of Park, Starts/runs fine. Dash works but everything else electrical is off.

    2010 6.2 Background info A couple months ago I had the third brake light issue with Hill Descent Control warning. Also, when the lights were on I would get that Hill Descent Control fault and cruise control would not work. If I turned the truck off and back on again without turning on the...
  24. Adam Miller

    Set (4) ofGen 1 beadlock capable wheels

    Yes.
  25. Adam Miller

    Set (4) ofGen 1 beadlock capable wheels

    Sold

Staff online

Members online

Total: 6,446 (members: 48, guests: 6,398)

Forum statistics

Threads
95,971
Posts
2,021,655
Members
59,692
Latest member
kalt2011
Top