Search results

Yes will surely do so It is weird indeed, because I haven’t performed any electric services or added accessories or any kind of work. The only thing I usually do is place the truck on a CTek charger, it might be it.

Relay # R02

Battery Junction Box Or fuse box next to the battery

Fortunately got the issue solved It was not a battery/cables/starter problem I've replaced the power relay in bjb and everything came back to life, no more errors and fired right up. Connected Diagnostic tool and no more codes. Everyone's input was helpful, Thanks

Sorry to hear that, since it might be it too in my situation Because I have performed all the recommended tests by jump starting / disconnecting the terminals overnight...etc with no luck. Will have to tow to the dealership and give it a shot. And update back on the forum Thank you everyone...

Checked for any visual wiring damage but none Also checked fuse F38 and F16 using a multimeter, none are blown

According to everyone's advice which is much appreciated, I performed the following overnight; 1. Disconnected battery cables in order to hopefully reset 2. Placed battery on CTEK charger, "Usually do that when hibernating" Afterwards, connecting everything back and all same faults and...

Yes I am able to do that, in fact it is currently placed on a CTEK charger Will post back if any successful attempts afterwards.

Battery Tester is showing 750-800CCA

Would this cause error and service lights to pop up on the dash?

Will have to re-perform this test, but i do recall communication errors appearing on Forscan with ECM/PCM&TCM. It seems something is off The truck is basically new at 2000miles on the clock

I have not tried to jump start yet, will need to obtain long jumper cables to do so since it is a one car garage.

Thanks everyone for the inputs provided I’ve disconnected battery terminals to reset but the same errors popped up before even starting the engine which eventually does not occur Ran OBD scanner but no codes Ran Forscan and it showed generic communication errors such as UO100 PCM...etc I have...

In terms of Aftermarket , only BD foglights that have been installed years ago. No tuners or performance add ons...etc Regarding battery test, used a battery tester/analyzer at home "Foxwell" without disconnecting the battery. It showed good voltage and around 820CCA. What happens after...

I really doubt a rodent is the reason, since the truck is stored a near sealed one car garage . Will go ahead and disconnect the battery , do I have to disconnect both cables or ground only?

After truck sitting for two weeks Attempted to remote start with no luck Went in and tried to start the truck, Turned ignition on and all the sudden all kinds of warning lights popped up such as eng coolant, oil pressure, blind alert...etc And as a result no cranking at all. Got the battery...

Took it to the dealer And all the sudden as usuall it stopped leaking When back home , coolant dripping is visual again

Have installed the s1's today on my front bumper, excellent output compared to previous kc hilites. Got them from fordraptorlights , excellent customer service and fast shipping.

Mine went out last week, fordraptorlights is sending me a replacement. Seems those are defective for some reason

Exactly, Did it on my own after the dealer performed oil change.

I'm surprised because I did the oil monitor reset back then myself.

Hey everyone Recently the following alert popped up onto my instrument cluster: "change engine oil required " The last dealer performed engine oil was done on February 2019. (Synthetic blend) The truck was driven less than 1000 miles during the 6 month period. Checked the dipstick, oil is...

Maybe it's possible to lengthen the drain tube?

That's what I've been experiencing , drove me crazy. Thought it was coolant leak

Wondering about this same issue Are you experiencing dripping after shutoff?