99% certain that it cannot be configured in Forscan… it appears to be controlled by the RTM itself, which comes in 315MHz and 433 MHz flavours. To get one working you need a new RTM and new tyre (tyre > tire ) sensors… or buy a 433MHz key.
It’s not listed in any of the BCM address spreadsheets...
Quick update... now on the hunt for the BCM memory code to change the RTM/RKE frequency from 433MHz EU/GCC frequency to 315MHz US spec keys... otherwise I'll be looking for a four button 433MHz key and have two pricey ornaments in the spare key bowl (which will at least open and start the...
No bueno @bobbybee that looks expensive. :frown: Front diff?
What’s the Icon 4 like? My mate's Raptor came with Icon 3 kit, rides well. Another driving buddy has Fox 3.0 on his… priced them up at TORC when ordering a replacement Roush intake… big *** of cash. o_O Cone Valve forks and Trax shock...
@bobbybee my Methods are only bead look. :Big Laugh: We were out on a mixed level drive, was first drive for a lot of people for a while including some of the L1/L2 drivers and first chance to get the Raptor out for me after not driving for ages (been on two wheels all summer:sparta:) so happy...
Mine is doing this, hunting/juddering on steady throttle... asked the Mrs. last night to try to/from work today locking it in 5th (doing it in 6th between 110-140kph) and seeing what it does. Also replaced Fuse 27 with the kit (was cooked), fuel pump drive unit (preventative), evaporator...
Roush Stage 2 uses the standard plugs, plug gap, coils and wires as its a relatively low state of tune for a boosted application (6psi). Contacted Roush about it this week as I'm about 7k km away from going the plugs and its running like they're due. The Ford parts store shows SP526X is...
Thanks @Xtinct think I’ll go with the factory manuals site option, looks good. May also download in due course for the Mrs Edge Sport too. Both that and the Raptor will be back in Ford UAE over my dead body at this rate. Not happy with having your pants down, every trip for service they want to...
Windows 10 and Forscan Extended Licence added to the MacBook… just waiting on the OBDLink EX cable coming, will be 5-7d via Amazon.ae. :893karatesmiley-thu
Tried all the options with the Autel unit, including all keys lost to reset the keys, then did parameter reset. No change, horn still beeping when I try the key programming using the owners manual method. Got spare keys which open and start the car at least.
Contacted Autel and they said that...
Yes... but if I can write two keys, activate remote start, activate customer key programming, etc... I'll try and figure it out and update here.
Especially motivated by the in-country Ford dealer trying to charge me ~1500-1600 USD for programming the new keys because they are saying they have...
Thanks, tried it again this morning and when I got to work as well... the horn is honking when I press any key on the original key in the ignition then nothing happens when I press the buttons on the other keys.
Found lots of dead end threads on the matter, particularly about this issue and...
The plot thickens… long story, a few twists… but long story short, was able to active the remote start in the PATS module using the Autel MK808BT plus code two keys to start the car. :33::Big Laugh:
The remote buttons on the two new keys aren’t working though… I’ve tried all the keys in...
Looking at the instructions provided by Fairway Ford (Ford OE ones) it looks like even a monkey could manage it. I have seen videos on doing it via Forescan... I don't have a working Windows computer though, so that's scuppered me so far.
Ford said that they couldn't source the kit and also...
Kit fitted, was a doddle to install. The bracket that holds the plug and TPMS comes away of you’re struggling to get your fingers in… but it’s a pain to clip back in as it’s besides a brace. I was able to secure it with a couple of the pop studs behind the antenna but struggled closer to the...
Kit ordered new OE with loom, antenna and two keys via a US Ford dealer on eBay. Dealer here wanted the price of the kit and two keys for one key. Was a no brainer. I’ll fit the kit and get the keys cut and get them to code them, hopefully enable the remote start capability... if not I’ll sort...
Found this thread whilst searching for getting dings out on the areas where the graphics are… dinged the side of the truck on Saturday. :manos:
Took the scenic route rather than the 20km detour to the petrol station to get money and a few bits and pieces before going to the MX track. Thought I...
Sorted… door open, ignition on, press and hold… sorted. RTFM! :hidesbehindsofa: On the plus side, no angy wifey after husband drivey…:Big Laugh::happy160:
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.