Search results

Just got back from Raptor Assault and had a blast! I will say for most of us this is a must and definitely worth doing. The program, facilities and instructors are all top notch and first class. You learn and experience what it is you paid so much money for. Most of the day is spent in the...

Unlikely any issue with either. Trailer must be plugged in or if not plugged in insert the lock out key/pin to prevent the coupler from sliding back and engaging the brakes. If plugged in and the brakes still engage then likely due to excessive angle and you may need to use the lock out key/pin...

I’m interested, in Tallahassee

My Baja design light bar is wired to my high beams using a relay off the wiring harness to the headlights. Power coming from the battery with inline fuse. The factory headlight acts as a switch to turn on and off the light bar. Take it to a professional and it can be wired to have no impact to...

Anyone have their leafs settling like this??

Yes, I’ve now found one or two post that indicate they had to do that. On mine it’s about 1/2 inch. If the instructions indicated that, then ok you know what your getting. It’s going back and I’ll spend the money for the BD.

Unless someone tells me I’ve installed something wrong the fitment of the RC light bar is bad. The installation instructions are worse. I’m way old enough to know better to buy cheap and expect anything more than cheap. I should have researched better. Sending the POS back and going with BD...

Can someone tell me why with Eibachs up front and Icons at option 2 I don’t have at least 1.5-2” of rake? Pics attached are empty bed, retrax cover and 1/8th tank of gas. Only thing i can think of is pulling my bass boat one weekend caused them to loose 1-1.5”, if that’s the case something is...

Thank you for the specs, good to know I’m not the only one. Taking it back in tomorrow

Ford dealership Just installed Eibachs and icons(stock setting) on my 2020 Raptor and did do an alignment. They gave me the sheet with the before and after alignment specs. I immediately noticed the front end would wander side to side causing to have to make constant slight steering adjustments...

Seems a 295/65 Nitto Ridge Grappler should run at 35.12 x 11.97 on a 9” wheel. Thinking some would run that with the extra height and with a +12 offset wheel it should keep the tire in a very similar position to the wheel well as stock.

Looking at going with 295/65/20, +12 off set wheel, stock suspension. Can’t seem to find anyone running that size, Anyone?

Thank you for all the help, springs it will be

How about the icon leafs? I read where the Deavers rust and make noise

On a 2020 with live suspension Would Eibach springs up front and 4” rear blocks like the ones readyLift has work good? Like to get a little lift, maintain the rake and do not want to mess up the live suspension. If there is a better way to accomplish this to ensure not messing up anything...