Search results

  1. M3toSVT

    Tuxedo Black paint match retrofit

    Of course. These have mini h1's installed.
  2. M3toSVT

    What did u do to your raptor today?

    The light output with the HID's in there will diminish over time as the projector is not meant for HID bulbs. Hopefully you went with at most a 35W setup. Any pictures of the cutoff on a wall?
  3. M3toSVT

    Tuxedo Black paint match retrofit

    I will be sure to get a few pics.
  4. M3toSVT

    Tuxedo Black paint match retrofit

    Customer wanted a similar build to mine with a few additions. First up would be a Tuxedo Black paint match to the headlight housing. Went ahead and stripped the lights down and sanded a few imperfections. Just a couple spots needed attention. Up next was to test the...
  5. M3toSVT

    Turn Signal Hyper Flash Solutions: Re-Programming BCM vs. Resistors

    What had happened was.... The BCM has cut off the turn signals circuit as a safety measure due to it detecting a short to ground. But what really happened is all the additional lights i have added to my turn signal circuit has increased the current draw on that circuit and the BCM believes...
  6. M3toSVT

    Who's got halos and led strips in their headlights?

    Here is a recent build I'm doing. Paint matched with Tuxedo black. Evil eyes were also paint matched with Tuxedo black.
  7. M3toSVT

    GEN 1 2012 low and high beam

    https://www.theretrofitsource.com/components/harnesses/f150-oem-hid-conversion-2009.html
  8. M3toSVT

    Turn Signal Hyper Flash Solutions: Re-Programming BCM vs. Resistors

    Also worked on my 2011. Now if I can just get my front turn signals working again.....
  9. M3toSVT

    I think I broke my headlight adjustment gear

    Are we talking oem projector, halogen, aftermarket?
  10. M3toSVT

    My headlights retrofit build (round 2)

    I took off the adhesive strip attached to the light and applied a clear epoxy to the back and then applied a generous amount in a couple spots over the whole light for added support.
  11. M3toSVT

    My headlights retrofit build (round 2)

    You can run these lights in amber constantly if wanted. Unless you want the RGB lights, but I don't think they are as bright as the switchbacks.
  12. M3toSVT

    My headlights retrofit build (round 2)

    Butyl Glue. Found here: https://www.theretrofitsource.com/accessories/morimoto-retrorubber-butyl-glue-50258.html
  13. M3toSVT

    Warped heads??!!!

    Did you give the go ahead to dismantle the engine? I find it hard to believe they are warped if the engine has never been overheated. But I may be biased, because I don't trust dealerships.
  14. M3toSVT

    F.S. Spyder Retrofit Headlights.

    SOLD! For sale are my original Spyder retrofit headlights. Some of you may have seen the retrofit build thread below. http://www.fordraptorforum.com/f81/my-headlight-retrofit-build-43492/ They are a good performing headlight, but I wanted to go all out and made another set to my...
  15. M3toSVT

    My Headlight Retrofit Build.

    Wish I would have known they were not making them anymore. Would have bought a couple on closeout. ---------- Post added at 03:55 PM ---------- Previous post was at 03:54 PM ---------- If any one is interested, I am now selling these headlights as they have just been collecting dust in the...
  16. M3toSVT

    My headlights retrofit build (round 2)

    The RGB LED's behind the projector is controlled with a RF remote. Set of 4 SVT Brake Caliper Higt Temp Decal Sticker Custom Size Color White | eBay
  17. M3toSVT

    My Headlight Retrofit Build.

    I bought the 24" XSB Switchbacks and used them in the DRL bar. The c-clamp LED's are no longer produced unfortunately. The XSB lights are quite flexible though. See my other build below. http://www.fordraptorforum.com/f81/my-headlights-retrofit-build-round-2-a-47105/
  18. M3toSVT

    My Headlight Retrofit Build.

    24" for the DRL bar. 2 sets of 3" for the sides and 80mm for the halo. Not sure want you mean as far as "any other setup goes".
  19. M3toSVT

    My Headlight Retrofit Build.

    See the link below. https://www.theretrofitsource.com/led-lighting/led-halos-strips/morimoto-xsb-led-switchback-strips.html
  20. M3toSVT

    My headlights retrofit build (round 2)

    Quick little update: Been driving with these now for almost 2 months. Not a ton of night driving, but enough to appreciate the beauty of the light output from these headlights. What really makes these projectors great are how wide of a beam they project. Back road driving is awesome when you...
  21. M3toSVT

    What is the most ridiculous (in a bad way) mod you have seen on a raptor?

    It's the truck telling her to "get this shit off of me".
  22. M3toSVT

    What did u do to your raptor today?

    Fixed the common broken fuel door.
  23. M3toSVT

    F.S. OEM Halogen HID retrofit

    I know the feeling. I have been taking up the dinner table with my builds here lately. Time to move out to the garage.
  24. M3toSVT

    F.S. OEM Halogen HID retrofit

    No worries, they needed to be installed and pictures taken to get a feel on how they look. Just let me know if you decide on these.
  25. M3toSVT

    My headlights retrofit build (round 2)

    One of the reasons I went with these was because of the DRL on them. But the OEM projectors can do a nice looking C Clamp as well. If you are interested we could talk more in PM. Keep in mind I have over $1200 invested in these in just parts, including the headlights. So a set similar to this...

Staff online

Members online

... and 21 more.
Total: 6,353 (members: 71, guests: 6,282)

Forum statistics

Threads
95,972
Posts
2,021,687
Members
59,694
Latest member
DoubtIT
Top