Search results

Thanks for the video.. found a couple more on youtube. Will do shortly.

OK here we go...

Had a carbon fiber/leather steering wheel custom made, going to install it tomorrow... looking for swap instructions/photos and tips. Like, torque number on the main bolt? How to bolt it back on perfectly straight? Should be pretty straight forward I guess, but would like to get myself well...

Is 2920 lumens constant output or just the first several seconds?

I see.. so with this 18x9 I am moving the wheels in 0.5inch compare to 17x8.5... not very noticable probably in terms of looking... but with 18x9 I probably can stuff BBKs in... decision time:emotions34:

I am running mehod NV 17x8.5, 0 offset 4.75'' backspace.. if replace with 18x9, +18 offset 5.75'' backspace, are the wheels going to stick out more or less? Thinking to go 18inch so I can get some BBK installed, but doesn't wanna lose the wide stance.

Well, not very impressed after two weeks... sending OEM for retrofitting

I have PC, and JDM whippe tune... been 2~3 years, no problem so far.

Went with Morimoto, kept the OEM in my garage for now, still attemped to try retrofit.... Hope someone can compare these LED to a good retrofit.

BTW, they are sure brighter than OEM HID. Now I am wondering how much more brighter a 50W retrofit can be...

Low beam vertical can be adjusted from the top, just like the OEM. Anything else has to be from the back. I don't think they pre-aim these lights at factory at all. On mine, driver side low beam was a little low, passenger side high beam was way too high. Horizontally looks OK. But I didn't do...

To those who have XB installed, did you needed to adjust the light after install? I have mine here. Brackets for whipple cooler is in the way, almost had to take off both the brackets and cooler to remove headlights... so I better make sure they are aligned before bolt everything back on.

Good to know! wait for black friday deal :D

Brighter than stock HID? by how much roughly? Still didn't find a local guy to do projector retrofit. Consider morimoto now. But some say they are NOT any brighter than stock HID.

Much better? My 2014's headlights reduced dramatically. I would like to do the 50W Evox-R 2.0 retrofit but cannot find anyone can do that locally. If they are much better then I would replace the blubs first while contine seraching.

I agree, 14lbs doesn't seem right... maybe good enough with sealant.

No rub? looks like all stock.

The gasket came with. Just tight the bolts a bit more. I did maybe 1/6-1/4 turn. But make sure you cleaned off the old sealant.

Installed a Spicer last month. I believe they are exactly the same except a FP brand plate. Used the included gasket, torqed to 14ft/lb, noticed very slow leak one week later. Hand tighted a bit more, no problem after. My 3/8 torque wrench is cheap and from ebay many years ago, so big chance I...

Found a local guy to do the job for me (bake headlights sounds too scary to do it myself), he recommends G5-EXL (brightest on the market) instead of EvoX-R 2.0 projector. Anyone has this G5 on the raptor? Would like to know some realy world experiences. EvoX-R 2.0 seems like a golden starndard...

Can you fill transmission through the B&M dipstick tube?

Did anyone compare XB to stock HID? in terms of brightness.

Northstar AGM

Where did you get them from at last? PM a link please if you could.

Dorman transmission oil pan came in today. Quanlity looks very good, especially for that price.