Search results

  1. R

    Installed Gen 2 Fox Race Series Coilovers……FINALLY!

    Certain UCAs allow adjustment of alignment on-the-truck, with the LCAs locked out. For those who hit things hard, this can be a performance (aka reliability) improvement. Icon had these for Gen 2, and SVC has for Gen 2 and 3. However, SVC requires drilling a larger hole for the non-tapered...
  2. R

    2021 Gen 3 Eibach Front Leveling Springs

    posting this again for people to learn from
  3. R

    2021 Gen 3 Eibach Front Leveling Springs

    For what its worth, I initially ran my factory 3.0s on my gen 2 at 1.5” of lift and disliked how quickly and violently they hit full top out in the downtravel. Adding preload puts more pressure on the shock when it hits full top out so its going to be more violent. And taking away down travel...
  4. R

    Onx6+ 30" arc on front bumper

    Silver trim is completely removed from behind light. The two piece grill was also cut to fit the light.
  5. R

    Onx6+ 30" arc on front bumper

    Here is the camera view
  6. R

    Onx6+ 30" arc on front bumper

    I don't really use the front camera much, but there was very little impact as the light is set back
  7. R

    Offroad suspension settings - Gen 3

    Drive mode adjusts throttle response, shifting, braking and other vehicle dynamics. For me offroad, Baja mode is super important because of how it turns down ABS. Normal ABS settings (e.g. when in sport) are downright scary in the dirt. This is particularly the case in washboard bumps. I'll...
  8. R

    Install and wiring XL80s and Onx6+ with relay

    nice work @razor2430
  9. R

    Offroad suspension settings - Gen 3

    So ... anyone with any input on these Gen 3 settings?
  10. R

    Offroad suspension settings - Gen 3

    Hi all, I have done some testing of my gen 3 in offroad conditions, in Baja mode. Conditions included lots of direction changes, lots of bumps and elevation changes, and plenty of embedded rocks in the surface and on top of it. I locked the diff, and put traction in the level 1 disable...
  11. R

    Install and wiring XL80s and Onx6+ with relay

    Learning I still am ;o)
  12. R

    Install and wiring XL80s and Onx6+ with relay

    For the Onx6+ I posted elsewhere about this, describing how I mounted and what I cut. https://www.fordraptorforum.com/threads/onx6-30-arc-on-front-bumper.95665/ moving to the wiring, I ran 12ga wire from connection on the light, up to the cab side of the battery tray, where I connected to a...
  13. R

    Install and wiring XL80s and Onx6+ with relay

    Thought I would share some ideas for how to wire XL80s on A pillar mounts and an 30" onx6+ bar on the bumper. I had the xl80s on my last truck, but hadn't wired a relay before. I'm obviously not a pro, so please let me know if I should adjust anything or you have other tips for me or others...
  14. R

    High lift jack /overland thread?

    Pro Eagle https://www.proeagle.com
  15. R

    Iconic Silver Club Gen 3 Raptor

  16. R

    Anything Coming from Fox?

    Fox Factory Race for the 2019-2020s were released September 2019. We're now in 2023 and still nothing for the 2021+ trucks. Fox, where are you??
  17. R

    BD LP4 Pro installed on a-pillar

    I agree the harnesses from BD are not great. For example, the harnesses that come with XL80s on A pillars should be set up the right lengths for the truck, but are far from it. Using this harness would create excessive wire lengths that just look bad inside the engine bay. I’m a noob so had...
  18. R

    $10K for Mods

    For bling - wheels, and tires too if you want bigger than 35. 37 KO2s fit without any mods, provided wheel offset isn't extreme. They also make offroad just that little bit better for added ride height/clearance, and softening the hits. For offroad - get a second spare wheel/tire, a jack...
  19. R

    gen 3 bump stops

    Thanks @dirtlvr that's good info, and totally lines up with my 2019 experience. Do you have stock coilovers and rear shocks on your gen 3? Hoping others still chime in with their thoughts and experiences!
  20. R

    gen 3 bump stops

    Definitely curious what SVC will come up with. That said, I would love to hear now from anyone who has run the existing offerings (RPG, Foutz, etc.) and can comment on improvements. Or, curious of guys who had air bump stops on prior gen 1 and 2 trucks, have run the gen 3 hard, and have...
  21. R

    gen 3 bump stops

    So…. Anyone have any thoughts on bump stops for the gen 3?
  22. R

    Confused with lights!

    Two more things to consider. First is the location of the lights. If you want light that is more evenly spread, and is more usable further away from truck, getting the lights up higher makes a big difference. Lights in the fog area aren't great on this metric, whereas lights up on the a...
  23. R

    Installed 37's on Gen3 35 Raptor - no issues.

    @Stern_94 nice rig!
  24. R

    Installed 37's on Gen3 35 Raptor - no issues.

    Also, rear droop was 15" to the fender flare to the tire
  25. R

    Installed 37's on Gen3 35 Raptor - no issues.

    @hyrepower I have the same width wheels at a +6 and the bulge of the tire is outside the fender flare, but the blocky tread bits are in line with the flare. I haven't run mine off road yet, but no spacers or springs in my future due to the consequences for downtravel. Will report on this once...

Staff online

Members online

Total: 2,564 (members: 24, guests: 2,540)

Forum statistics

Threads
95,515
Posts
2,010,754
Members
59,139
Latest member
WVMtneer23
Top