Search results

Good luck on the test, you'll do fine! I run IC706MIIK in my truck. May be more than 5 bills... 73's Lou

under pass seat!!! use a bungy to hold her from bouncin around..... tested and proven.....

Morning and welcome aboard!!!!

^^^^^^ to battery directly. Yes it can be done, but is not advised.

Well done man, about time ya tackled it.... not as big a deal now looking back right??? L8tr Oh and I used lock tite for tread seal... :) ---------- Post added at 07:20 AM ---------- Previous post was at 07:14 AM ---------- Shock pressure on the actual shock has little effect that you...

Trey, get shoe goo and when tighetend down smear this on the threads and the nut to frame and bolt head to frame. This is my race prep for all bolts on my cars, none back off that I have ever had. Don not use automotive goop, close but not as good as shoe goo. Good luck.....

Welcome to and from SoCal....

does it have to be remote controlled or just a series of toggle voltage switching?

Agree on shorter.....

There are many ways to free up shocks, some are doing the springs, others 3.0's, progessive/position sensitive and for low speed you can make/open the free bleed hole in the pistons. There is no silver bullets!!!!

It is weeping and will get worse. Lift the truck and rub the shat, see if you feel a pit or nick. FYI it seems the right rear will show up first. Wipe all build up off as that will F the seal up worse as it has sticky oil with contaminates in it and you could start messing up bushings and end...

You can revalve, but only affects the bump zone, but the by-pass is still in th same spot

Yup, see build thread....

YES. Done.....

Not Fallon???

Dang, did Stevie Wonder apply the sealant??????

Morning and welcome aboard!!!!

Morning and welcome aboard!!!!

Morning and welcome aboard!!!!!

140 I spend time in hotter climates than cold.....

I replaced the oil in the rear end with Swepco, 304 I think it was. full syn is good for temps but bearing appear to not like the thin syn stock....

Morning and Welcome aboard!!!

Dan06 this just relearns where each tire is you need a J2534 passthrough to program the pressure and treshold %....

I have done most of it, you will need PPT switch for 2 way. look in my build thread. You use the ipod jack and a floating ground adaptor.

If you don't like the Lowrance I may need one for the race car....:crazy: