Search results

Do you have a link to the ones you used? All of them are around that price.

Trim the claw marks down, and you'll be just fine.

The base rectangular portion does match well and sticks well to the factory stickers. It's just the extra claw marks they add that go past for aesthetics. Looks good, but don't work great in practice. They hold until you get a hot day, then release with gravity. In hindsight, I would have...

Has anyone found a good convex blind spot add-on attachment for the side view mirrors that look good aesthetically? Because of the built-in blind spot indicator in the top left, I'm looking to put something in the lower left and/or along the bottom. The typical round or square shapes don't...

I'm ready to give up and do the same on the visor stickers. It was only 1 of 4 on each sticker, so I was trying to give it time and heat to fix, but it's too annoying.

That's better then. I only saw the "Rated at 3 watts / .75amps draw per LED" on their web page.

Not sure if I missed it, but is 30A correct on this bar? I see .75 per LED * 39 LEDS per 40" bar. Please let us know when you get a chance to test and compare the edge model (and your other stuff too).

I installed the Putco Switchblade 60" light bar. Make sure you get the 92009-60 if you have the BLISS pro-trailer option. I don't like tapping into the factory harness if I can help it, so I also got a plug-and-play harness. CURT 7-pin plug-and-play T-Connector (P/N: 55384)...

Hey Jeff, I'm don't recall seeing it asked before, but is there any chance you could make a version that would support the rectangular BD S2s on the end for a full BD light set?

I think they are completely worth it. They are more expensive than the others, but you can definitely tell you are getting what you are paying for. Plus, a few hundred on an expensive truck is no big deal if you are going to have it for a while. They installed easily, just make sure you get...

I'm getting FormulaOne Stratos on the entire truck, plus roof as we speak for $700 total. $200 of it is just the roof since they charge $100 per section. Sent from my iPhone using Tapatalk

I was thinking about using this adjustable bracket in that same location of the skid plate to allow for different angles, etc. I'm thinking this may help in regards to visibility for picky law enforcement. Bracket: https://www.amazon.com/gp/product/B0013HP98C/?tag=fordraptorforum-20...

I'd say a catch can is the way to go.

Use FORScan as mentioned previously.

The T-connector I used goes under the truck between the spare and bumper, not on the outside of the truck. There is a harness the plugs in back of the connector you see near the license plate. Makes for a clean install that you cannot see without getting up under the truck.

Nice write-up. I also decided not to tap into the little taillight harness. Instead, I used a plug-and-play T-connector for the 7-pin plug and tapped into that wiring so I wasn't actually spicing into the factory wiring. It just makes for a clean removal back to factory if I ever wanted to...

Being recessed is normal and there is little room for any difference in the kit besides the slots. I think they my just look more to you because he is also using the amber covers, which add a little bit more to the face. It could also just be the difference between pictures and in person...

I finally got around to installing my BD Unlimited kit and UPR catch can yesterday. I wanted to confirm that the BN-BU and BU-GN (3rd wire from the left) are the correct wires in the headlight connectors if you want to tie in a relay. I tied the smaller S2's to this relay so they'd always...

Yeah...first and last time they'll be seeing it as long as no warranty work. I prefer to do all my own maintenance anyway.

I hesitantly took the truck in for the first service since complementary. Although I normally do all service myself, I figured it might be good to let them go through everything just to make sure everything is still good from the factory. Apparently, my hesitation was justified when I got my...

Got the new no-drill Raptor Gatorbacks in last Friday and put them on. They fit great and feel very sturdy with the brackets used to secure them to the frame in addition to the fender screws. Front: https://www.sharptruck.com/ford-raptor-logo-gatorback-mud-flaps-gcr42f-9 Rear...

I finally got around to installing these backup lights after doing all the rust proofing, nano coating, etc. first. It's hard finding time these days to do everything myself, so I try to prioritize. I was also installing a Putco Switchblade 60" light bar at the same time. Regardless, I don't...

I used cosmoline heavy military grade on the entire undercarriage after first converting, priming, and painting the rear end. Then, I used cosmoline black on the rear wheel wells.

Just what I was looking for...thanks!