Search results

  1. cooooop_ks

    Rear wheel well liner

    It's roll on and using a 1" paint brush to get into the places the roller wouldn't fit. The kit comes with 2 textured rollers, but you have to provide the brush.
  2. cooooop_ks

    Rear wheel well liner

    That's how this was done by rolling on and using a small paint brush in the corners and places the roller couldn't fit
  3. cooooop_ks

    Rear wheel well liner

    This is not that hard to do. Remove the tires, and mud flaps if you have them. Scuff the paint by hand. Mask off the shocks and the fender flares. Apply with a roller and a small paint brush in the corners and edges. 2 coats, both wheel wells, with dry time took about 2 hours.
  4. cooooop_ks

    Rear wheel well liner

    I just added the Raptor Liner (brand) roll on, to the rear wheel wells. Was fairly easy to do, didn't take too long and I am really happy with the results.
  5. cooooop_ks

    To Decal or to Not Decal

    Mine didn't come with graphics and I wanted some brand recognition but smaller so I went with the rocker and hood decals
  6. cooooop_ks

    Graphics Package? Yay or Nay?

    No. Choose your own if you want.
  7. cooooop_ks

    Anyone Install a Windshield Banner?

    My dealer said they had problems with the collision sensor when installing these banners
  8. cooooop_ks

    miles per gallon

    16-17 highway or town. Pulling a trailer 11-12
  9. cooooop_ks

    Intro - Ruby Red 19 From California “Red Velvet”

    Sweet Raptor, welcome and congrats.
  10. cooooop_ks

    Finally found my Raptor

    Nice Color! Congrats and welcome
  11. cooooop_ks

    New Raptor Owner - SoCal

    Congratulations and welcome. What are the wheels on your Raptor?
  12. cooooop_ks

    Pre-runner / Light Bar?

    I have the N-Fab bar on my Raptor. On my bar, the welds were smooth and even, powder coat in gloss back was also very good. The look of the welds are what I am always concerned with on these type of purchases. I put a set of running boards on my wife's F150 and the welds were all over the...
  13. cooooop_ks

    First Time Raptor Owner in Kansas

    Welcome. What part of Kansas? I am from the Salina area
  14. cooooop_ks

    New member to the FRF

    Nice color ! Welcome to the Forum
  15. cooooop_ks

    Looking For 2019 SCREW Deal

    https://www.long-mcarthur.com/new-Salina-2019-Ford-F+150-Raptor-1FTFW1RG1KFB68390 https://www.long-mcarthur.com/new-Salina-2019-Ford-F+150-Raptor-1FTFW1RG2KFC46014
  16. cooooop_ks

    New eco beast owner

    Nice looking truck and welcome
  17. cooooop_ks

    Moon roof seals/maintenance

    What do you use for the tracks?
  18. cooooop_ks

    GEN 2 Highest mileage Gen 2, Who has it?

    3 weeks, 2500 miles. Been parked for a week for accessories and driving my Mustang GT instead.
  19. cooooop_ks

    Moon roof seals/maintenance

    Some where I read about lubing the seals on the moon roof. I have not been able to find anything in the manual about how often to lube, where to lube and what to lube with?
  20. cooooop_ks

    FINALLY A Raptor Owner

    Congratulations
  21. cooooop_ks

    Graphics Package? Yay or Nay?

    I got mine from Rock Mountain Graphics
  22. cooooop_ks

    Graphics Package? Yay or Nay?

    I am ok with the hood graphics but the stripe on the bed just doesn't cut it for me. I found a smaller decal I put on the lower front door rocker and a hood side decal . Last photo was the truck with no decals on.
  23. cooooop_ks

    What did you drive before your Raptor? - Post a pic

    2012 F150 FX4
  24. cooooop_ks

    Picked this up yesterday...

    Welcome, nice color !
  25. cooooop_ks

    GEN 2 Top 15 Tonneau Covers - which do you have?

    BAK Revolver 4

Staff online

Members online

... and 22 more.
Total: 2,209 (members: 72, guests: 2,137)

Forum statistics

Threads
95,505
Posts
2,010,378
Members
59,113
Latest member
SK Raptor R
Top