Thanks! I actually did use a CAT Scale on my way home from our last trip. There is an app you can download so you can get the info and pay without having to go inside. The weighing results are sent to your phone and to your e-mail. Or you can still go inside to get the paper results. The...
For local trips in and around central Texas, the stock set-up is fine. But next year we'll be hitting the road for a major road trip and I want to beef up the suspension. I have these bad boys (Deaver HD +3) to install on Saturday!
Then later in the month or in early November, I'll be...
If you have some specific locations, send them my way. We haven't planned the trip so I haven't done much research on where we'll be going specifically. We'll hit most National Parks and National Forests and will definitely be stopping in Sedona, AZ and Moab, UT to hit many off-road trails...
Here are the measurements with the trailer hooked up, with and without the WD hitch.
With the WD hitch:
Driver Front - 40.5 in
Passenger Front - 40.25 in
Driver rear - 39.875 in
Passenger Rear - 39.75 in
Without the WD hitch:
Driver Front - 40.75 in
Passenger Front - 40.75 in
Driver rear -...
Here is the complete rig all hooked up with the WD hitch. Raptor has full tank and the trailer is loaded with normal gear, but not loaded for a trip (groceries, drinks, fresh water in tank, etc.). I would guess the trailer is in the 5,600 lb range with the tongue weight around 575 lbs. I will...
Thanks!! We are really going to enjoy it next year when we hit the road for 2-3 months hitting New Mexico, Colorado, Arizona, Utah, Idaho, Oregon, Washington, California, and who knows where else!!
My 2019 SCREW has a GVWR of 7,050 lbs. The front axle GAWR is 3,700 lbs and the rear axle GAWR is 3,750 lbs.
Here are the dimensions I measured on level ground and with a full tank.
Measured from ground to bottom of highest point of fender.
Driver Front - 40.5 in
Passenger Front - 40.5...
Hope this helps other members that tow and/or plan to beef up their suspension. I have a 2019 (801A) SCREW and I recently purchased a 23 foot travel trailer (27 foot including the tongue). I use a weight distribution (WD) hitch to help with the sag and distribute more weight to the front...
I agree. The RV deallership pretty much had a requirement that any tandem axle trailer being towed off their lot had to have the tow vehicle with a WD hitch. They provided mine and set it up while we did the walk-through. Their price for the hitch was about the same had I bought it myself...
I also have a 2019, stock at the moment. I pull a 23 foot (27 foot including tongue) travel trailer that weighs in about 6,000 lbs loaded. I also have a weight distribution hitch. The Raptor handles it easily.
This setup works great for local trips, but I want something more substantial...
Settled on installing the Deavers on Saturday, 10/17. Will likely start the process at 9 am. The long range weather forecast shows sunny weather with the temp range of 59-79 F. So it looks like it should be a beautiful Saturday. I'm not sure if I'll also do the Eibachs on the same day. I...
Ordered my Deaver HD +3 from Apollo Optics (thanks Nick!!) on 9/1 and they arrived on 9/24. I had heard about delays and back orders and lengthy times for delivery, but mine arrived just fine. They are indeed painted black. I also purchased some Amsoil HDMP and will be coating the heck out of...
Deaver HD +3 leaf springs came in this week!!
I'd like to target 10/17 or possibly 11/7 for the install. So hope you gentlemen are available and the weather is nice!!
Here is some data for the OP and others towing. I went out to some level ground and took some measurements of my stock 2019 SCREW. The gas tank was a little more than half full. Measurements were from ground to bottom of fender flare (highest point or center wheel).
Driver Front = 40 1/4 in...
I just bought a 23 ft travel trailer that was about 5,400 lbs when I picked it up. The tongue weight was about 550 lbs. The dealer I bought from had a rule that any trailer that was over 3,000 lbs or had tandem axles, required a WD hitch and sway control. They actually provided a really nice...
Purchased the Deaver HD +3 leaf springs, the Eibach springs, and SDHQ Bump Stop Strike Pads today! Now just have to wait for them to arrive and for the weather to cool down so the install can start!
Thanks to Nick at Apollo Optics for the deal!! I think I understand from the package I...
Good to know. The trailer is 23 ft (26.6 ft if you include the tongue) and not too heavy at all. I think the tongue weight can be as high as 650-700 lbs fully loaded and with an extra battery added. For a trip into the Hill Country or Austin or places close by, I might have stuck with the...
Got a trailer brake control installed last night.
Also found a partner to follow the Raptor around.
GVWR is about 6,500 lbs. Hope to pick the trailer up on Monday. Will be upgrading to Eibachs and Deavers in the coming months to help with the towing. The weight distribution hitch...
Thanks! I appreciate the tips and info! I live in League City, so just around the lake from you. And as you probably guessed based on my avatar, I work at JSC and probably just a few miles from you. I'd love to borrow some tools from you so I don't need to buy new tools that I'd probably...
Wow! Thanks for the info and tips! And for a link to your build thread. I'll definitely be checking that out. I plan to pull a 23 ft travel trailer (27 ft with the tongue) that has a tongue weight between 550 lbs and 600 lbs. That's why I'll be getting the Deaver HD +3 leafs. Here is the...
As many of us Texans like to say........."where in Texas is Maine?!" I have a daughter in Maryland, maybe we can meet halfway.......... :)
I'll definitely keep you in mind for the install. I don't have an urgent timetable for the install, so late Sept or October would work out.
Hey everyone. I'm planning to upgrade to Eibach springs and Deaver HD +3 leaf springs. I'm debating whether I want to try the installation myself or have a shop do the work. Anyone in the greater Houston area interested in spending a weekend on the installation? I could use some experienced...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.