In my particular build, I ran new wire to 6 front stage speakers.
However, in your case, you can mount your crossovers at your amp rack. From there, you can tie into the oem b&o output harness to feed your door speakers and rears. The only thing you will have to do is run new tweeter channels...
I stand corrected. I just called linkswell and they have no record of a gen 3. I asked about the knobs and USB ports and they said that was not their unit so I am not sure which one they are showcasing in the video.
This looks the next gen linkswell. Similar to the Phoenix, it has physical knobs at the bottom. If you look closely, it also includes to two USB ports below the airbag lights.
I imagine the difference between this one and Phoenix is this one won’t have the bugs like the Phoenix but will cost...
That harness in the picture from the zen to the dsp is simply a mock up. That zen was a first gen and I was originally concerned about chimes being routed to the correct speakers. After upgrading to the current version, I went optical out from the zen to my dsp.
Just FYI, the tune in conjunction with the 170 stat eliminates rich air fuel mixture. It’s right where is should be. A tune is pretty much mandatory for the cooler stat for this reason. If you truck is still running rich, I would either get a tune revision or switch to 5Star.
Lots of misinformation in this thread.
A cooler thermostat is not used to make the operator feel better by looking at a smaller number on a gauge. A cooler thermostat is used for the following reasons. Each is individual but they all work together.
1. Cooler EGT’s due to cooler block...
Not true. With a tune, the 170 degree stat does a lot more than just drop engine operating temps. It allows you to run more timing and helps with egt’s. Both of which are extremely important in a forced induction engine.
There are two different tread compounds for KO2’s.
One is called D/T (more dense tread compound- comes with 50k warranty- no snow rating)
The other is non-D/T (softer tread compound- no 50k warranty- does have snow rating)
Factory Raptor KO2’s are NON D/T. That’s why you are seeing increased...
My chimes work and sound like OEM. Sometimes the chimes will revert back to the IPC and sound more "tinny". I dont know how long you have had your unit installed but 1. Make sure the firmware is up to date. 2. Make sure chimes are setup properly in the navtv settings portal. Instructions to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.