Search results

  1. Rap19

    GEN 2 aFe Power Momentum XP Pro Question ***HELP!!***

    I have had this for 3 years and haven’t had any problems. I’m stage 2 tuned also. Make sure the rubber groove on the filter is seated properly on the air box ( yellow arrows ). ‍♂️
  2. Rap19

    Factory steps Backward???

    https://www.fordraptorforum.com/threads/running-boards-mounted-on-opposite-side.97452/post-1903632 I did mine, looks proper now. Gen 2
  3. Rap19

    Running boards mounted on opposite side?

    Easy (16)10mm bolts to remove. It does look better and the holes line up with the truck doors . Thanks for posting!
  4. Rap19

    Borne Off-Road Billet Tow Hooks

    Ended up sanding and polishing the hooks down to the aluminum on the outer edges. Matches the skid plate and not so much in your face looking.
  5. Rap19

    Borne Off-Road Billet Tow Hooks

    Here are pictures of how far the hooks poke out. Measured from the silver skid plate.
  6. Rap19

    Borne Off-Road Billet Tow Hooks

    Just changed back to red ones, the third hole you’re talking about to recess the hooks more is used for the oem skid plate mount and won’t work with the factory bumper.
  7. Rap19

    Borne Off-Road Billet Tow Hooks

    Yep, from the side they look buckey . I got them and a red pair for less than 1/2 off on Amazon warehouse deals.. figured I'd give them a chance.
  8. Rap19

    Borne Off-Road Billet Tow Hooks

    They do stick out a couple of inches, I guess for easier hook up and a tool for shorter people to use as a step to get to the engine bay.
  9. Rap19

    Borne Off-Road Billet Tow Hooks

    The Gold ones match the DRLs. Still on the fence if I like the look yet.
  10. Rap19

    SPD Equal Length Resonator Delete (Gen3-like trombone) for Gen2s

    I have the stock exhaust with only the SPD trombone added. It does sound great when you give it the gas, but leaving in the morning for work and leaving my employer's parking garage sounds like a unrefined UPS truck. Just normal driving sounds like I'm flooring or hot rodding when actually I'm...
  11. Rap19

    SPD Equal Length Resonator Delete (Gen3-like trombone) for Gen2s

    I read where another member used a ratchet strap to rejoin the muffler to the trombone loop. I attached the strap to the frame in front of the trombone loop and the other end to the back of the muffler and slowly ratcheted the two sections together.
  12. Rap19

    SPD Equal Length Resonator Delete (Gen3-like trombone) for Gen2s

    Ordered mine on 2/13/22.. still waiting too.
  13. Rap19

    So I got the Cam Phazer Recall letter from Ford today.

    I uninstalled my stage 2 tune from Cobb/ Goose tuned on Sunday. Took my truck to Ford to re flash the ecu per the TSB yesterday (Monday). When I got home I re flashed the ecu and transmission STAT. The Cobb aftermarket tune does not mess with Ford's ecu changes that help with cam phaser...
  14. Rap19

    Wet Carpet and Tech Bulletin 19-2345 Condensate Drain

  15. Rap19

    Wet Carpet and Tech Bulletin 19-2345 Condensate Drain

    Checked my front passenger floor under the floor mat and it was damp Ordered the small elbow (Ford oem part) from ebay for 5 dollars. Jacked up the front passenger side on the frame rail behind the front wheel. Kept the front tire on, just turned to the left. You can easily see and get to the...
  16. Rap19

    RPG Traction Bars Installation Instructions

    The longer U-bolts did not come with the "kit", I had these from Amazon on hand. Tad long, but fit fine. https://www.amazon.com/dp/B071VNW4RC/?tag=fordraptorforum-20
  17. Rap19

    RPG Traction Bars Installation Instructions

    On wet roads in 2wd there is still a loss of traction but less axle wrap and less squirming of the rear wheels. On wet roads I usually have to put it in AWD mode, mainly because the tune has made the truck more aggressive off the line. On highway offramps I am able to push the truck a little...
  18. Rap19

    RPG Traction Bars Installation Instructions

    Already thought about doing that to avoid modifying the leaf blocks. Here is RPG’s response.
  19. Rap19

    RPG Traction Bars Installation Instructions

    When you put the Deavers on you will lose the OEM lift block because you don't need it. However, you also lose the OEM bump stop landing which is built into the lift blocks I ground down. I think you might need an aftermarket bump stop relocation kit. I believe RPG has them that will work on...
  20. Rap19

    RPG Traction Bars Installation Instructions

    Thanks! Hope they perform as good as they look and cost$
  21. Rap19

    RPG Traction Bars Installation Instructions

    After market bump stops This Gojak wheel dolly really helps with lining up these heavy tires , no more f’n my back up. Pain in the *** , but done. Less expensive options out there, this looks the best. Should help with axle hop since I’m running a stage 2 Goosetune.
  22. Rap19

    RPG Traction Bars Installation Instructions

    This RPG built in bump stop landing has to be ground down to fit.. it’s too long to fit. Front oem leaf spring u bolts have to be longer to work with rpg strike plate. More pics coming
  23. Rap19

    RPG Traction Bars Installation Instructions

    Okay, on a 2019 raptor with stock leaf springs this is not a easy bolt on 1 hour job as told by RPG. It requires heavy grinding of the stock leaf blocks and 3 holes drilled into the frame. 1 hole on driver’s side and 2 on the passenger side. Here are a few pics. More pics of...
  24. Rap19

    RPG Traction Bars Installation Instructions

    Mount Plate Pad - Ford (HL3Z-5598-B) Part Number: HL3Z-5598-B https://www.fairwayfordparts.net/oem-parts/ford-mount-plate-pad-hl3z5598b
  25. Rap19

    RPG Traction Bars Installation Instructions

    Only have the front mount for the drivers side installed. Required two more holes in the frame to secure. Rear leaf block modification is my next task.

Staff online

Members online

... and 8 more.
Total: 2,024 (members: 58, guests: 1,966)

Forum statistics

Threads
95,468
Posts
2,009,322
Members
59,076
Latest member
ja5657
Top