It was never not working for me. Its just that it seemed to work with 3 and with 4 in place, or as the configurator calls them 3-glare free high beam and 4-adaptive driving beam
I had some DTC's for the IPMA module with the 4 in place initially but now I feel as though that was unrelated. I...
No it doesn’t eliminate the bending. I would just follow the original glare free as built instructions. Don’t let me questions confuse you lol. It’s 100% worth it. I’m more just confused about the nuances of forscan and what it calls glare free vs dynamic driving beam. But again, follow the...
I used asbuilt the first time around. Never really had an issue. Thought some DTC’s in IPMA were related but they may not have been. Then when I was back in my SCCM module configurator for heated steering wheel updates I noticed the highbeam selection said ADAPTIVE DRIVING BEAMS and not GLARE...
Yes any time I make a change it prompts me with the warning. With the 4 back in place, the configurator now says ADAPTIVE DRIVING BEAM.
Yes the fog lights still work as they are supposed to, I can manually turn them on and off. I haven't enabled bambi mode.
I am not referencing manual...
Thanks, maybe it's just disabled in the SCCM because you control it through the APIM. I keep getting nervous that the 2023's have different configurations for some reason lol.
For what it's worth I just went and reloaded my factory AS BUILT and changed it back to a 4. No DTC's yet but its also day time so the lights aren't on.
I do notice in the configurator that now it says ADAPTIVE DRIVING BEAM instead of GLARE FREE HIGHBEAM. Also it shows the rain sensor as...
For context, I did it all with AS BUILT initially and all seemingly worked fine. I then was installing the heated steering wheel when I went back in and saw in SCCM configurator it said I didn't;t have glare free enabled with the 4 in place, and I was getting IPMA DTC's related to the camera and...
Could somebody confirm if the APIM has to be backed up and re-loaded, or if we can simply install the vac + SCM and then make the updates to APIM.
Could someone also confirm if there is no way to get rid of the HVAC module DTC once the new one is swapped in.
Thanks!
Yea that’s what concerns me haha. I’m surprised more people haven’t run into these little nuances. Do you get the blue highbeam symbol with the glare free enabled?
That’s what I’m saying. That 4 becomes a 3. And I have the green highbeam symbol with the A in either case. I’m not asking what the superficial difference is as you said I just explained that. I’m asking under the covers what’s the difference. They both seem to work just wondering the actual...
In Forscan when you use the SCCM configurator to enable glare free (instead of AS BUILT, all other modules programmed using AS BUILT), it places a “3” instead of a “4” in the 724-04-01 line. When using a “3” I noticed I now get the blue highbeam symbol when the high beams are active which was...
This same issue is happening to me. 2023 with a little over 2k miles on it. Sometimes the air blows strong out of all vents. Sometimes it’s weak and the drivers side vent is much weaker than the middle. And sometimes it feels like there’s no air flow what so ever even on speed 7 even though I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.