Search results

FYI: I've changed my recommended adapter on my tutorial for anyone getting started with FORScan to the OBDLink EX USB adapter here for $40: https://www.amazon.com/dp/B081VQVD3F This adapter has a built-in switch, is capable of firmware flashing, and 9x faster than a regular USB Adapter like the...

Regarding the Auto Engine Shutdown.... A number of people have asked me how to let their truck continue running so they could keep a dog comfortable with the A/C running if they go into a store. I just tested the BCM value below and my truck stayed running for 61 minutes before I shutoff the...

SOLD!!!

Price dropped to $800

Price has been dropped to $825

Although I don't recommend it in the tutorial, you can do FORScan programming with the engine running and that should alleviate your issue. A few years ago in the SoCal summer when I was testing values in the 110 degree heat in my truck, I had the truck running and A/C on and made hundreds of...

801A gets the 4.2" cluster and 802A gets the 8" pictured in my post.

That value is contained in truck's IPC as-built values that I pull from a person's VIN and program the cluster so that it is completely plug and play. I've programmed hundreds of F150 clusters.

What do you mean?

I'm not sure whether it would be compatible with a '17 XLT with the T/S button on the shifter. If this cluster is installed on a 2018 non-Raptor F150 the DM button on the shifter does nothing so not sure whether it would work with the T/S button.

Selling a 2018 MPH 802A 8" Raptor cluster for $850 (PayPal only). Price includes cluster, new front clear lens, all programming, priority shipping. Programming includes: mileage correction, engine hours, idle hours, as-built programming, VIN coding. Cluster will be completely plug-and-play...

Trucks that don't ship with interior motion sensors have the following set as default: IPC 720-02-02 1xxx xxxx BCM 726-02-01 xxxx x2xx xxxx BCM 726-34-01 x0xx xxxx xxxx BCM 726-39-02 x0xx xxxx xxxx There is no way to re-map the function of an existing button or create a new function because we...

BCM 726-38-02 xxx0 xxxx xxxx Lock Feedback Horn Cfg: 0=disabled, 1=enabled

If you message me your VIN so I can pull your as-built values then I can give you values to try

This value in BCM should disable the auto lock: 726-15-01 x0x0 x0x0 x0xx It is thought that Ford stopped enabling the cluster control of the auto lock feature in the cluster menu because the FordPass App gets out of sync with the truck when the user changes the setting in the cluster and the...

Also, make sure the switch is in the HS-CAN switch when first connecting.

Did you install the drivers for the adapter? http://www.ftdichip.com/Drivers/CDM/CDM21224_Setup.zip Did you go into FORScan settings, connection tab and change adapter type to FTDI?

Whenever running a service procedure that involves the PCM such as the PCM relearn you should remove tune to the factory default until after the procedure and then put your tune back on to be on the safe side. Normal FORScan programming can be done with the tune enabled safely. Note: I'm not...

Well that's a strange one because the PCM & TCM relearn procedure is a Ford service procedure and I've never heard of this happening. You didn't have a custom tune on it at all? Some tunes will re-write the Vehicle Identification Block in the PCM that can cause this issue but never heard of...

The normal 2018 F150 can change tire size in FORScan and then perform a PCM relearn followed by a TCM relearn and remove the CEL so I would think it would be the same on the Raptor unless others have tried and been unsuccessful.

Did you do a PCM relearn as well as a TCM relearn in FORScan? You can also buy a Hypertech speedometer calibrator if you can't get FORScan to clear the CEL

Update: SOLD!!!

Just the one listed (Qty 1)

2019 8" Raptor clusters would have a different part # and I'm unsure about the compatibility of this 2018 in a 2019 because I don't know what was added in the 2019 model Raptor that this 2018 might not be capable of displaying. Most guys will give me a mileage to program considering the 2-5 day...

It's simple to replace it and if you have the 802A 8" cluster then this is the part: https://parts.autonationfordwhitebearlake.com/oem-parts/ford-mask-fuel-and-temperature-ga-jl3z10890ha I made a post on how to replace the lens over here...