Search results

Nope, FORScan can't access PCM.

I had to go out and check since I'm always using the remote to unlock truck but on mine when I touch either the front driver/passenger handle (not the black button), all the doors unlock. It would've been nice if Ford put the same sensor on the rear door handles.

I flashed my spare 2016 instrument cluster's firmware to that of a 2017 Raptor so when I get time I'll plug it in and see if I can find any goodies that would benefit you guys.

^^^

Unless they changed functionality on the 2017s it's as follows: The autolock feature locks all of the doors after all of the following have occurred: l All the doors are closed. l The ignition is on. l The vehicle is shifted into any gear to put the vehicle in motion. l The vehicle attains a...

Only thing I know of is the Dark Car mode that you could set before a hunting trip otherwise pressing lock on fob should immediately turn them off.

APIM 7D0-01-01 xxAx xxxx xxxx - this will prevent the stereo from being able to be turned on at all when truck is off and pushing the power button on stereo (without putting truck on in accessory mode from start button) ** This used to be the case on Sync 3 v1.0 but haven't tested this since...

None that I'm aware of, sorry. Congrats and thanks for the kind words!

This is the run time of stereo without accessories on. Set to 7D0-01-01 xx6x xxxx xxxx for 60 mins. Example: If truck has been off you can hop in and hit the stereo on/off button (without touching ignition start button) and radio will come on for 60 mins. If you're already in truck and turn...

If someone wants to test this could you let me know if it works on Raptor? BCM: 726-48-02 x*xx xxxx xxxx Auto start/stop disable: 0=disabled, 1=enabled I think pushing the button will still illuminate but should be disabled anyways.

Dark Car feature - Courtesy Lights OFF & Welcome/Farewell lights OFF ---------- Post added at 07:40 AM ---------- Previous post was at 07:26 AM ---------- Adding Adaptive Cruise & Lane Keeping System has been accomplished on 2016 F150s but I don't know anyone with a 2017 that has done it...

Actually I found the following in my notes: 714-02-01: 0244 4444 xx - Wheel Temperature = 68ºF 714-02-01: 024C 4C4C xx - Wheel Temperature = 76ºF 714-02-01: 0254 5454 xx - Wheel Temperature = 84ºF 714-02-01: 0258 5858 xx - Wheel Temperature = 88ºF - Raptor Default 714-02-01: 025A 5A5A xx -...

Disregard the setting for full hot on HSW, I just pulled a Raptor's as-built values and it's already set to that setting. Default is warm on 2015-2016 F150s so I assumed yours was set that way too.

HSWM: 714-02-01 0258 5858 28 - full hot BdyCM: 726-32-01 xxxx x1xx xxxx - Dark Car enabled You should have a button on left hand side of steering wheel that increases/decreases the distance it follows vehicle in front of you when ACC is on.

DRLs only work when truck is in gear, nothing found to overcome that. Edit: The Canadian setting might keep them on when truck is in PARK after it's initially shifted to drive during the same engine on cycle. I seem to remember something like this happening a while ago when I tested it.

I posted this on another forum but if anyone wants these DRLs on automatically (even with headlamp switch in off position) you can set the values below. These are the values that Canadian trucks ship with where DRLs are forced and you will not be able to toggle them off through the IPC menu...

You need mirrors with the memory positions.

726-45-01 xxxx 7Fxx xxxx - Allow all DRL choices If the 7F there isn't set, then FORScan will give an "incompatible configuration" error when trying to write any of the following: 726-50-01 0280 DRL - low beams 726-50-01 0482 DRL - front fog lamps 726-50-01 0886 DRL - front turn lamps...

You'll need to set both of these (your truck won't have either already set this way) 726-26-02 x1xx xxxx xxx 726-50-01: 01xx

It must be selected in the IPC menu. It probably didn't ship from factory like that but probably someone on the dealer lot did it before you took delivery.

Here's all the choices (except what I posted earlier for Parking Lights only as DRL): 726-45-01: xxxx 7Fxx xxxx - Allow All DRL Choices AND 726-50-01: XXxx where XX = 01 = Disabled / Parking Lights Only 02 = Low Beams 04 = Front Fog Lamps 08 = Front Turn Lamps 10 = Dedicated DRL Lights (LED...

Very important, lots of guys have ended up regretting it later. There are modules in your truck that the Motorcraft site doesn't list your as-built values for so if you make a change in one of them and want to go back to original later, you'll be hunting for someone with the exactly optioned...

This sets the parking lights as DRL in conjuction with setting the Daytime Lights on in the IPC menu. So if you have the type of headlight switch with the Parking/On/Auto position it would need to be turned to Auto. If you don't have the Auto position it should work in the off position if...

Just parking lights as DRL. If you want both low beams & parking lights as DRL just make this change: 726-26-02 x1xx xxxx xxxx For only parking lights as DRL just do the following (I edited my other post): 726-26-02 x1xx xxxx xxxx 726-50-01 017F

If anyone wants to run Parking Lights (outer halo) as DRL this may work for you: BCM 726-26-02 x1xx xxxx xxxx 726-50-01 017F