Search results

I use the spots on a-pillar more then the driving/flood combos in the bumper.

Do you have a picture of the truck ? Never seen a raptor without the factory flares.

Are the side leds on both sides or can you get them single sided

I don’t see gen 1’s dropping in price much. If you look at gt500 prices 07-09 10-12 and 13-14 have stayed the same with the new one coming out. In some aspects prices should incline a little cause of the publicity with new vehicle release. If you can’t afford new price tag you buy one that you can.

I believe the noise your hearing is in the steering shaft or I-shaft. In fairly common to see a u-joint go bad or rag joint to be bad.

All on but no headlights I forgot to turn them on. They need re-adjusted

4 rigid d2 driving pattern No headlights

20” rigid sr Spot/flood combo No headlights

No headlights

Rigid side shooter- spot pattern

I don’t believe so

Haha and it’s surprisingly cheap

Where are you located ?

I had 20x9 +15 offset 5in backspace With 325 60 On mid perch they rubbed in reverse on the inner wheel well. Had inch on clearance on stock UCA. Tire was Nitto terra a/t not as aggressive side wall. 20x10 I agree would have clearance issues.

I bet I get that way during the winter when I can’t drive my gt500.

I have Roush it does have drone but at cruising speed it not bad. You can still have a normal conversation and hear radio at low volume.

60lbs hr injector will be fine. My gt500 made 644whp on a 90 degree day with no cool down time from a 20min drive to the dyno. Was on stock 47lbs hr injector with 93. Would recommend a header it will help lower boost level one to two psi Or at least cat deleted.

Lol that’s who I hope to find.

I’ve been running Nitto terra grapplers g2. There a good performer in snow and ice we get in NW Ohio. In sand,dirt do really good. Mud you have to spin them fast to get them to clean them out. I like the Exo grapplers the best out of the Nitto line up. hankook atm General at2 or atx ran those to...

At least they left the me the correct spare. Now got to get rid of the 20s which so far has been more difficult then I thought.

Very nice bike collection you got going there. Which Honda is that in the last pic ? I used to have one similar.

I cheat I just lift it on the 2 post hoist lca is easiest if you need to remove one front tire at a time. Just remember to put a jack stand on frame rail just in case.

Old rim and tire Will I got this truck it had some 20’s with 325 60 Nitto terra. Ran them for awhile. Went to silver lake dunes aired down and did get much sidewalk flex. some I found a set of factory beadlocks and had the trim Ring powder coated. Look much better now. 35x12.5 17 Nitto Terra...

Raptor36 what patten is the 20” bar Spot or combo ? Looking to replace my rigid with a bd.