Recent content by dewalt

I have dealt with you before, so that is why the caution

Better research your mounts that they are as good as your lights.

As good as you can get , and an upgrade. Package deals and a good guy for working with you Rick@FreedomMotorsports FRF Customer Support Specialist Please send me a Private Converstation or email at [email protected]

Offload alliance is good as well. They will get back to you

Look up svcoffroad.com Call them and get it done. No waiting a month for a reply

You tell them your load and they make the springs. I have 13 leaf plus 4 . It is not rocket science. Figure out your load, figure out your height , and you have spring specs

Tow haul doesn't change to 2 hi. On a 17 button is on gearshift so it's easy to use

My touring drones at 80 mph. Livable, but there. Spring loaded dump valve in 1 pipe on the touring. So it should be a bit quieter at idle, and the same as sport at full throttle.

No complaints on a 17. Skips 3 0r 4 smooth when you stand on it. Good package with the 3.5. Looks like paddles respond better in manual. Backshifts a couple of gears if running with cruise at 60 and pull into manual. But I have a gearhead since the start. Really driveable

A bridle to do 2 tires at a time should speed things up with CO2.

Volts times amps equals watts 746 watts is a horsepower Starting ar 110 makes sence

You have a 110 volt plug in the truck

I have a home depot one in mine. Measure between fender humps. I like that there is room below a cover, and you have a full height area at the back. Whatever works for you

Home Depot has an aluminum one that is 48 x 48 x 6. Works good with a cover as you still have room above it https://www.homedepot.com/p/Jobox-Jobox-50-in-Long-4-Drawer-Wide-Aluminum-Drawer-Unit-1404980/203782815

A half inch dyneema bridle onto front hooks with soft shackles wouldn't add any weight and give you a front pull option As well. Dyneema would reduce winch weight if you replaced cable